Product specification
10
14
General Purpose & High Cap.
Y5V
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
TESTS AND REQUIREMENTS
Table 8 Test procedures and requirements
TEST TEST METHOD PROCEDURE
REQUIREMENTS
IEC 60384- 4.3
21/22
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Mounting
4.4
Any applicable method using × 10 magnification
In accordance with specification
Within specified tolerance
Visual
inspection and
dimension
check
Capacitance (1)
4.5.1 Class 2:
At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
4.5.2 Class 2:
In accordance with specification
Dissipation
factor (D.F.) (1)
At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
At Ur (DC) for 1 minute
4.5.3
In accordance with specification
Insulation
resistance
<General purpose series>
4.6
Class 2:
Temperature
characteristic
∆C/C
Class 2:
Between minimum and maximum temperature
Y5V: -30 °C to +85 °C
Y5V: 22% to -82%
Normal Temperature: 20 °C
<High Capacitance series>
∆C/C
Class 2:
Y5V: 22% to -82%
4.7
A force applied for 10 seconds to the line joining the terminations Force
and in a plane parallel to the substrate
size ≥ 0603: 5N
Adhesion
size = 0402: 2.5N
size = 0201: 1N
NOTE:
1. For individual product specification, please contact local sales.
www.yageo.com
Jul 29, 2010 V.5
YAGEO [ YAGEO CORPORATION ]
