Product specification
12
15
Surface-Mount Ceramic Multilayer Capacitors
General Purpose
NP0
16 V to 50 V
TESTS AND REQUIREMENTS
Table 9
Test procedures and requirements
TEST
Mounting
TEST METHOD
IEC 60384-
21/22
4.3
PROCEDURE
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
REQUIREMENTS
No visible damage
Visual
inspection
and
dimension
check
Capacitance
4.4
Any applicable method using × 10 magnification
In accordance with specification
4.5.1
Class 1:
f = 1 MHz for C
≤
1 nF, measuring at voltage 1 V
rms
at 20 °C
f = 1 KHz for C > 1 nF, measuring at voltage 1 V
rms
at 20 °C
Within specified tolerance
Dissipation
factor (D.F.)
4.5.2
Class 1:
f = 1 MHz for C
≤
1 nF , measuring at voltage 1 V
rms
at 20 °C
f = 1 KHz for C > 1 nF, measuring at voltage 1 V
rms
at 20 °C
In accordance with specification
Insulation
resistance
4.5.3
At U
r
(DC) for 1 minute
In accordance with specification
Temperature
coefficient
4.6
Class 1:
Between minimum and maximum temperature
NP0: -55 °C to +125 °C
Normal Temperature: 20 °C
<General purpose series>
ΔC/C:
Class 1:
NP0: ±30 ppm/°C
Adhesion
4.7
A force applied for 10 seconds to the line joining the terminations
and in a plane parallel to the substrate
Force
size
≥
0603: 5N
size = 0402: 2.5N
size = 0201: 1N
Bond
strength of
plating on
end face
4.8
Mounting in accordance with IEC 60384-22 paragraph 4.3
Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm
No visible damage
<General purpose series>
∆C/C
Class 1:
NP0: within ±1% or 0.5 pF
whichever is greater
www.yageo.com
Aug 05, 2011 V8
YAGEO [ YAGEO CORPORATION ]
