SUPPLY VOLTAGE
MONITOR
ISSUE 3 - NOVEMBER 1997
DEVICE DESCRIPTION
The ZM33064 is a three terminal under
vo l ta ge mo ni t or ci rc ui t f or use i n
microprocessor systems. The threshold
voltage of the device has been set to 4.6 volts
making it ideal for 5 volt circuits.
Included in the device is a precise voltage
reference and a comparator with built in
hysteresis to prevent erratic operation. The
ZM33064 features an open collector output
capable of sinking at least l0mA which only
requires a single external resistor to
interface to following circuits.
Operation of the device is guaranteed from
one volt upwards, from this level to the
device threshold voltage the output is held
low providing a power on reset function.
Should the supply voltage, once established,
at any time drop below the threshold level
then the output again will pull low.
The device is available in a TO92 package for
through hole applications as well as SO8 and
SOT223 for surface mount requirements.
ZM33064
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SO8, SOT223 and TO92 packages
Power on reset generator
Automatic reset generation
Low standby current
Guaranteed operation from 1 volt
Wide supply voltage range
Internal clamp diode to discharge delay
capacitor
4.6 volt threshold for 5 volt logic
20mV hysteresis prevents erratic operation
APPLICATIONS
Microprocessor systems
Computers
Computer peripherals
Instrumentation
Automotive
Battery powered equipment
SCHEMATIC DIAGRAM
4-89
ZETEX [ ZETEX SEMICONDUCTORS ]
