AZ2150
MINIATURE
POWER RELAY
FEATURES
•
30 Amp switching capability for both N.O. and
N.C. contacts
•
1 Form A, B and C contacts available
•
DC coils to 120 VDC
•
Life expectancy to 10 million operations
•
Class B insulation standard
•
Class F (155°C) version available
•
Available with an epoxy seal for automatic wave
soldering and immersion cleaning
•
Proof Tracking Index (PTI/CTI) 175
•
UL, CUR file E44211 including versions meeting
UL 508 and UL 873 spacing and contact rating
requirements; VDE 132710 ÜG (some models)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (max.)
Release Time (max.)
Minimum operations
1 x 10
7
1 x 10
5
at 30 A 120 VAC Res. (N.O.)
Max. 12 ms
Typical: 8 ms
Max. 5 ms
Typical: 3.5 ms
CONTACTS
Arrangement
Ratings
SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Resistive load:
Max. switched power: 900 W or 7200 VA
Max. switched current: 30 A
Max. switched voltage: 30 VDC or 300 VAC
UL Rating:
See chart for UL contact ratings.
AZ2150 Series meets UL 508 Group A spacing
and UL 873 refrigeration and safety control
requirements. AZ2151 Series meets UL 508
Group B spacing requirements.
VDE Rating:
AZ2150-1A - 25 A at 250 VAC, 1 x 10
4
, resistive
AZ2150-1C - 20 A at 250 VAC, 1 x 10
4
, resistive
Material
Resistance
Silver cadmium oxide
< 20 milliohms initially
(at rated current, voltage drop method)
Dielectric Strength
2500 Vrms contact to coil
(at sea level for 1 min.)
1500 Vrms between open contacts
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
1000 megohms min. at 500 VDC, 20°C
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-55°C (-67°F) to 85°C (185°F)
-55°C (-67°F) to 105°C (221°F)
0.062" (1.5 mm) DA at 10–55 Hz
20 g
P.B.T. polyester
Tinned copper alloy
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
25 grams
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
500 mW
2.2 W at 20°C (68°F) ambient
1.8 W at 40°C (104°F) ambient
43°C (77°F) at nominal coil voltage
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
Weight
NOTES
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Unsealed relays should not be dip cleaned.
Other coil resistances and sensitivities available upon request.
Please call the factory.
5. Specifications subject to change without notice.
1.
2.
3.
4.
ZETTLER
electronics GmbH
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2003-03-12
Junkersstrasse 3, D-82178 Puchheim, Germany