AZ2850
30 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
30 Amp switching capability
DPST-NO and DPDT configuration
Meets 8 mm creepage, 4 kV dielectric
Class F construction
PCB terminals
Epoxy sealed version available
UL, CUR file E44211, VDE pending
GENERAL DATA
DPST (2 Form A)
DPDT (2 Form C)
Resistive load:
Max. switched power: 560 W or 8310 VA
Max. switched current: 30 A (N.O.), 3 A (N.C.)
Max. switched voltage: 600 VAC or 30 VDC*
* Note: If switching voltage is greater than 30VDC,
special precautions must be taken.
Please contact the factory.
CONTACTS
Arrangement
Ratings
Life Expectancy
Mechanical
Electrical
Operate Time
Release Time
Minimum operations
5 x 10
7
1 x 10
5
at 30 A 120 VAC Res. N.O.
15 ms typical
25 ms maximum with bounce
10 ms typical
25 ms maximum with bounce
(with no coil suppression)
Rated Load
UL, CUR
N.O.
30 A at 277 VAC General Use, 100k cycles
1 Hp at 120 VAC, 100k cycles
2.5 Hp at 240 VAC, 100k cycles
110 LRA / 25.3 FLA at 240 VAC (DC coils only),
30k cycles
3 A at 277 VAC General Use, 100k cycles
Silver cadmium oxide or silver tin oxide
<50 milliohms initially
(6 V, 1 A voltage drop method)
Dielectric Strength
1500 Vrms contact to contact
(at sea level for 1 min.)
4000 Vrms contact to coil
2000 Vrms between contact sets
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
10
9
ohms minimum at 500 VDC
DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
At nominal coil voltage
DC: -40°C (-40°F) to 85°C (185°F)
AC: -40°C (-40°F) to 65°C (149°F)
-40°C (-40°F) to 105°C (221°F)
0.062" (1.5 mm) DA at 10–55 Hz
Operational, 10 g for 11 ms
1
/
2
sine pulse
(no contact opening > 100usec)
Non-destructive, 100 g for 11 ms
1
/
2
sine pulse
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
86 grams
20 per plastic tray / 100 per carton box
UL, CUR
N.C.
Material
Resistance
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
DC: 0.925 W
AC: 2.6 VA
DC: 5.0 W at 20°C (68°F)
AC: 7.0 VA at 20°C (68°F)
DC: 48°C (86°F) at nominal coil voltage
AC: 68° C (122°F) at nominal coil voltage
Max. 155°C (311°F)
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Packing unit in pcs
ZETTLER
electronics GmbH
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2004-07-20
Junkersstrasse 3, D-82178 Puchheim, Germany
ZETTLER [ ZETTLER ELECTRONICS ]
