欢迎访问ic37.com |
会员登录 免费注册
发布采购

AZ6961-1C-9D 参数 Datasheet PDF下载

AZ6961-1C-9D图片预览
型号: AZ6961-1C-9D
PDF下载: 下载PDF文件 查看货源
内容描述: 10 AMP超小型 [10 AMP SUBMINIATURE]
分类和应用:
文件页数/大小: 2 页 / 58 K
品牌: ZETTLER [ ZETTLER ELECTRONICS ]
 浏览型号AZ6961-1C-9D的Datasheet PDF文件第2页  
AZ6961
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
High sensitivity, 120 mW pickup
Dielectric strength 5000 Vrms
Isolation spacing greater than 8 mm
10 Amp switching capability
Epoxy sealed version available
Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
UL, CUR file E43203
VDE file 131637
CONTACTS
Arrangement
Ratings
SPDT (1 Form C)
SPST (1 Form A)
Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 240* VDC or 440 VAC
*
Note: If switching voltage is greater than 30 VDC,
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
1 x 10
7
1 x 10
5
at 8 A 250 VAC res.
7 ms at nominal coil voltage
3 ms at nominal coil voltage
(with no coil suppression)
special precautions must be taken.
Please contact the factory.
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.)
1000 Vrms between open contacts
Insulation
Resistance
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
1000 megohms min. at 20°C, 500 VDC,
50% RH
C250
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Break Contact: 5 g at 10 …500 Hz
Make Contact: 20 g at 10…500 Hz
10 g
P.B.T. polyester, UL94 V-O
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
8 grams
20 per plastic tube / 1000 per carton box
Rated Load
UL, CUR
10 A at 250 VAC resistive [1]
8 A at 30 VDC / 250 VAC [1]
8 A at 30 VDC / 250 VAC, 100k cycles [2]
B300 Pilot Duty [1]
R300 Pilot Duty [1]
8 A at 250 VAC resistive, [1], [2] and [3]
[1] Silver cadmium oxide, [2] Silver tin oxide,
[3] Silver nickel
VDE
Material
Resistance
Silver cadmium oxide, silver tin oxide
or silver nickel, gold plating available
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
120 mW
140 mW (60 VDC coil)
1.2 W at 20°C (68°F) ambient
20°C (36°F) at nominal coil voltage
Max. 130°C (266°F)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Packing unit in pcs
ZETTLER
electronics GmbH
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2004-07-29
Junkersstrasse 3, D-82178 Puchheim, Germany