AZ6962
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
High sensitivity, 120 mW pickup
Dielectric strength 5000 Vrms
Isolation spacing greater than 10 mm
Proof tracking index (PTI/CTI) 250
10 Amp switching capability
Epoxy sealed version available
Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
•
UL, CUR file E43203
•
VDE file 40010953
CONTACTS
Arrangement
Ratings
SPDT (1 Form C), DPDT (2 Form C)
SPST (1 Form A and 1 Form B)
Resistive load:
Max. switched power: 240 W or 2500 VA
(2 Form C: 150 W or 1250 VA)
Max. switched current: 10 A
(2 Form C: 5 A)
Max. switched voltage: 240* VDC or 440 VAC
*
Note: If switching voltage is greater than 30 VDC,
•
•
•
•
•
•
•
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
3 x 10
7
1 x 10
5
at 8 A 250 VAC res.
7 ms at nominal coil voltage
3 ms at nominal coil voltage
(with no coil suppression)
special precautions must be taken.
Please contact the factory.
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.)
2500 Vrms between contact sets
1000 Vrms between open contacts
Insulation
Resistance
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
1000 megohms min. at 20°C, 500 VDC,
50% RH
C250
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Break Contact: 5 g at 10 …500 Hz
Make Contact: 20 g at 10…500 Hz
10 g
P.B.T. polyester, UL94 V-O
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
8 grams
20 per plastic tube / 1000 per carton box
Rated Load
UL, CUR
10 A at 250 VAC resistive, 30k cycles [1], [2], [3]
10 A at 30 VDC resistive, 30k cycles [1], [2], [3]
B300, R300
5 A at 250 VAC resistive, 30k cycles [1], [2], [3]
(2 Form C)
8 A at 250 VAC resistive, 100k cycles [1], [2], [3]
(1 Form A, 1 Form B and 1 Form C)
Silver tin oxide [1] or silver nickel [2],
gold plated silver nickel [3] available
< 100 milliohms initially
VDE
Material
Resistance
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
120 mW (up to 24 VDC coil)
140 mW (48 VDC and 60 VDC coil)
1.2 W at 20°C (68°F) ambient
Terminals
Max. Solder Temp.
Max. Solder Time
20°C (36°F) at nominal coil voltage
Max. 130°C (266°F)
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Packing unit in pcs
ZETTLER
electronics GmbH
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2004-07-28
Junkersstrasse 3, D-82178 Puchheim, Germany
ZETTLER [ ZETTLER ELECTRONICS ]
