AZ764H
16 AMP HIGH TEMPERATURE
MINIATURE POWER RELAY
FEATURES
•
•
•
•
•
•
•
•
Ambient Temperature up to 105°C (221°F)
Sensitive coil
Dielectric strength 5000 Vrms
Low height: 15.7 mm
16 Amp switching
Isolation spacing greater than 10 mm
Proof tracking index (PTI/CTI) 250
Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
•
UL, CUR file E43203
•
VDE file 40012572
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 480 W or 4000 VA
Max. switched current: 16 A
Max. switched voltage: 300 VDC* or 400 VAC
*
Note: If switching voltage is greater than 30 VDC,
GENERAL DATA
Life Expectancy
Mechanical
Electrical
(ohmic load at
105°C / 221°F)
Operate Time (typical)
Release Time (typical)
Minimum operations
3 x 10
7
1.7 x 10
5
at 10 A 230 VAC res.
2.8 x 10
5
at 8 A 230 VAC res.
3.2 x 10
5
at 6 A 230 VAC res.
7 ms at nominal coil voltage
3 ms at nominal coil voltage
(with no coil suppression)
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
VDE
Material
Resistance
10 A at 250 VAC general use
10 A at 250 VAC resistive, 105 °C, 150k cycles
16 A at 250 VAC resistive, 105 °C, 10k cycles
Silver silver tin oxide
< 100 milliohms initially
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.)
1000 Vrms between open contacts
Insulation
Resistance
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
Dropout DC coils
10
5
megohms min. at 20°C
500 VDC 50% RH
C250
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 105°C (221°F)
-40°C (-40°F) to 105°C (221°F)
20 g at 30…500 Hz
30 g
P.B.T. polyester, UL-94 ; V0
Tinned copper alloy, P. C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
14 grams
20 per carton tube / 1000 per carton box
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
140 mW (DC coil)
2.2 W at 20°C (68°F) ambient
16°C (29°F) at nominal coil voltage
155°C (311°F)
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. Solvent Temp.
Max. Immersion Time
Weight
Packing unit in pcs
ZETTLER
electronics GmbH
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2005-08-04
Junkersstrasse 3, D-82178 Puchheim, Germany
ZETTLER [ ZETTLER ELECTRONICS ]
