AZ822
SUBMINIATURE
DIP RELAY
FEATURES
•
•
•
•
•
•
•
•
•
Low profile for compact board spacing
DC coils to 48 VDC
Life expectancy to 10 million operations
Standard PC 0.1" grid terminal spacing
Fits standard 16 pin IC socket
Epoxy sealed
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
UL, CUR file E43203
CONTACTS
Arrangement
Ratings
DPDT (2 Form C)
Bifurcated crossbar contacts
Resistive load:
Max. switched power:
60 W or 125 VA
Max. switched current:
2A
Max. switched voltage: 220 VDC* or 250 VAC
*
Note: If switching voltage is greater than 30 VDC,
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Capacitance
Minimum operations
1 x 10
8
5 x 10
5
at 1 A 30 VDC
(see table for additional figures)
5 ms at nominal coil voltage
2 ms at nominal coil voltage
(with no coil suppression)
Contact to contact: 1.2 pF
Contact set to contact set: 1.6 pF
Contact to coil: 1.5 pF
At 10 mA contact current
2 ms at operate N.O. side
3 ms at operate N.C. side
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
Material
Resistance
1.0 A at 24 VDC
0.5 A at 120 VAC
Silver palladium, gold clad
< 50 milliohms initially
Bounce
(typical)
Dielectric Strength
1000 Vrms contact to coil
(at sea level for 1 min.)
1000 Vrms contact to contact
1000 Vrms between contact sets
Insulation Resistance
Dropout
1000 megohms min. at 20°C, 500 VDC,
50% RH
Greater than 5% of nominal coil voltage
At nominal coil voltage
-55°C (-67°F) to 90°C (194°F)
-55°C (-67°F) to 105°C (221°F)
0.062" (1.5 mm) DA at 10–55 Hz
20 g
P.B.T. polyester (UL94 V-0)
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
4.5 grams
20 per plastic tube / 1000 per carton box
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
74 mW 3 - 12 V coils
98 mW 15 - 24 V coils
147 mW 48 V coils
0.94 W at 20°C (68°F)
15°C (27°F) at nominal coil voltage
Max. 105°C (221°F)
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay adjustment may be affected if undue pressure is exerted
on relay case.
4. Specifications subject to change without notice.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Packing unit in pcs
ZETTLER
electronics GmbH
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2004-08-22
Junkersstrasse 3, D-82178 Puchheim, Germany
China
ZETTLER [ ZETTLER ELECTRONICS ]
