eZ80F915005MOD
eZ80F91 Mini Enet Module Product Specification
12
DIS_IRDA pin on the I/O connector Low. The shutdown is used for power savings.
To enable the IrDA transceiver, DIS_IRDA is left floating and PD2 is set to Low.
Serial Interface Ports
The eZ80F91 MCU contains two UARTs with programmable baud rate genera-
tors. UART0 is connected to GPIO PD[0:7] on the I/O connector. UART1 is con-
nected to GPIO PC[0:7] on the I/O connector.
Note:
Do not connect an RS-232 interface without level shifters. There are no
RS232-level shifters on the eZ80F91 Mini Enet Module.
Physical Dimensions
The footprint of the eZ80F91 Mini Enet Module PCB is 2.00 inches by 1.90 inches.
See Figure 4 for dimensions and top-layer silkscreen.
PS023602-0804
PRELIMINARY
Onboard Component Description
ZILOG [ ZILOG, INC. ]
