HCC/HCF4013B
DUAL ’D’ – TYPE FLIP–FLOP
.
.
.
.
.
.
.
.
.
SET-RESET CAPABILITY
STATIC FLIP-FLOP OPERATION - RETAINS
STATE INDEFINITELY WITH CLOCK LEVEL
EITHER ”HIGH” OR ”LOW”
MEDIUM-SPEED OPERATION - 16MHz (typ.)
CLOCK TOGGLE RATE AT 10V
QUIESCENT CURRENT SPECIFIED TO 20V
FOR HCC DEVICE
STANDARDIZED SYMMETRICAL OUTPUT
CHARACTERISTICS
5V, 10V, AND 15V PARAMETRIC RATINGS
INPUT CURRENT OF 100nA AT 18V AND 25°C
FOR HCC DEVICE
100% TESTED FOR QUIESCENT CURRENT
MEETS ALL REQUIREMENTS OF JEDEC TEN-
TATIVE STANDARD No. 13A, ”STANDARD
SPECIFICATIONS FOR DESCRIPTION OF ”B”
SERIES CMOS DEVICES”
EY
(Plastic Package)
F
(Ceramic Frit Seal Package)
M1
(Micro Package)
C1
(Plastic Chip Carrier)
ORDER CODES :
HCC4013BF
HCF4013BM1
HCF4013BEY
HCF4013BC1
PIN CONNECTIONS
DESCRIPTION
The
HCC4013B
(extended temperature range) and
HCF4013B
(intermediate temperature range) are
monolithic integrated circuits, available in 14-lead
dual in-line plastic or ceramic package and plastic
micropackage.
The
HCC/HCF4013B
consists of two identical, inde-
pendent data-type flip-flops. Each flip-flop has inde-
pendent data, set, reset, and clock inputs and Q and
Q outputs. These devices can be used for shift reg-
ister applications, and, by connecting Q output to the
data input, for counter and toggle applications. The
logic level present at the D input is transferred to the
Q output during the positive-going transition of the
clock pulse. Setting or resetting is independent of
the clock and is accomplished by a high level on the
set or reset line, respectively.
June 1989
1/11
ETC [ ETC ]
