06035A101KAT2A全新原装原理图各脚功能电路原理芯片引脚定义-中国IC网-芯三七

产品型号06035A101KAT2A的Datasheet PDF文件预览

C0G (NP0) Dielectric

General Speciﬁcations

C0G (NP0) is the most popular formulation of the “temperature-compensating,” EIA Class I ceramic materials.

Modern C0G (NP0) formulations contain neodymium, samarium and other rare earth oxides.

C0G (NP0) ceramics offer one of the most stable capacitor dielectrics available. Capacitance change with

temperature is 0 ±30ppm/°C which is less than ±0.3% C from -55°C to +125°C. Capacitance drift or hysteresis

for C0G (NP0) ceramics is negligible at less than ±0.05% versus up to ±2% for ﬁlms. Typical capacitance

change with life is less than ±0.1% for C0G (NP0), one-ﬁfth that shown by most other dielectrics. C0G (NP0)

formulations show no aging characteristics.

PART NUMBER (see page 4 for complete part number explanation)

0805

101

Size

(L” x W”)

Voltage

6.3V = 6

10V = Z

16V = Y

25V = 3

50V = 5

100V = 1

200V = 2

250V = V

500V = 7

Dielectric

C0G (NP0) = A

Capacitance

Code (In pF)

2 Sig. Digits +

Number of Zeros

Capacitance

Tolerance

Failure

Rate

A = Not

Applicable

Terminations

T = Plated Ni

and Sn

Packaging

2 = 7” Reel

4 = 13” Reel

U = 4mm TR

(01005)

Special

Code

B = ±.10 pF (<10pF)

C = ±.25 pF (<10pF)

D = ±.50 pF (<10pF)

F = ±1% (≥ 10 pF)

G = ±2% (≥ 10 pF)

J = ±5%

A = Std.

Product

Contact

Factory For

1 = Pd/Ag Term

7 = Gold Plated

Contact Factory

For Multiples

NOT RoHS

COMPLIANT

K = ±10%

NOTE: Contact factory for availability of Termination and Tolerance Options for Speciﬁc Part

Numbers. Contact factory for non-speciﬁed capacitance values.

The Important Information/Disclaimer is incorporated in the catalog where these speciﬁcations came from or

available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

022620

C0G (NP0) Dielectric

Speciﬁcations and Test Methods

Parameter/Test

Operating Temperature Range

Capacitance

NP0 Speciﬁcation Limits

Measuring Conditions

Temperature Cycle Chamber

Freq.: 1.0 MHz ± 10% for cap ≤ 1000 pF

1.0 kHz ± 10% for cap > 1000 pF

Voltage: 1.0Vrms ± .2V

-55ºC to +125ºC

Within speciﬁed tolerance

<30 pF: Q≥ 400+20 x Cap Value

≥30 pF: Q≥ 1000

100,000MΩ or 1000MΩ - µF,

Charge device with rated voltage for 60 ± 5 secs

@ room temp/humidity

Insulation Resistance

whichever is less

Charge device with 250% of rated voltage for 1-5

seconds, w/charge and discharge current limited

to 50 mA (max)

Note: Charge device with 150% of rated voltage

for 500V devices.

Dielectric Strength

No breakdown or visual defects

Appearance

Capacitance

No defects

Deﬂection: 2mm

Test Time: 30 seconds

±5% or ±.5 pF, whichever is greater

Meets Initial Values (As Above)

Variation

Resistance to

Flexure

Stresses

Insulation

Resistance

≥ Initial Value x 0.3

≥ 95% of each terminal should be covered

Dip device in eutectic solder at 230 ± 5ºC for 5.0 ±

0.5 seconds

Solderability

with fresh solder

Appearance

No defects, <25% leaching of either end terminal

≤ ±2.5% or ±.25 pF, whichever is greater

Meets Initial Values (As Above)

Capacitance

Variation

Dip device in eutectic solder at 260ºC for

60sec- onds. Store at room temperature

for 24 ± 2hours before measuring electrical

properties.

Resistance to

Solder Heat

Insulation

Resistance

Meets Initial Values (As Above)

Dielectric

Strength

Meets Initial Values (As Above)

Appearance

No visual defects

Step 1: -55ºC ± 2º

30 ± 3 minutes

Capacitance

Variation

≤ ±2.5% or ±.25 pF, whichever is greater

Step 2: Room Temp

≤ 3 minutes

Meets Initial Values (As Above)

Step 3: +125ºC ± 2º

Step 4: Room Temp

30 ± 3 minutes

Thermal Shock

Insulation

Resistance

≤ 3 minutes

Dielectric

Strength

Appearance

Repeat for 5 cycles and measure after

24 hours at room temperature

Meets Initial Values (As Above)

No visual defects

Capacitance

≤ ±3.0% or ± .3 pF, whichever is greater

Charge device with twice rated voltage in test

chamber set at 125ºC ± 2ºC

Variation

≥ 30 pF:

≥10 pF, <30 pF:

<10 pF:

Q≥ 350

Q≥ 275 +5C/2

Q≥ 200 +10C

for 1000 hours (+48, -0).

(C=Nominal Cap)

Load Life

Remove from test chamber and stabilize at

room temperature for 24 hours

before measuring.

Insulation

Resistance

Dielectric

Strength

≥ Initial Value x 0.3 (See Above)

Meets Initial Values (As Above)

No visual defects

Appearance

Capacitance

Variation

≤ ±5.0% or ± .5 pF, whichever is greater

Store in a test chamber set at 85ºC ± 2ºC/ 85% ±

5% relative humidity for 1000 hours

≥ 30 pF:

Q≥ 350

Q≥ 275 +5C/2

Q≥ 200 +10C

(+48, -0) with rated voltage applied.

≥10 pF, <30 pF:

<10 pF:

Load

Humidity

Remove from chamber and stabilize at room

temperature for 24 ± 2 hours before measuring.

Insulation

Resistance

≥ Initial Value x 0.3 (See Above)

Dielectric

Strength

Meets Initial Values (As Above)

The Important Information/Disclaimer is incorporated in the catalog where these speciﬁcations came from or

available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

051818

C0G (NP0) Dielectric

Capacitance Range

PREFERRED SIZES ARE SHADED

SIZE

0101*

0201

0402

0603

0805

1206

Soldering

Packaging

Reﬂow Only

All Paper

Reﬂow Only

All Paper

Reﬂow/Wave

All Paper

Reﬂow/Wave

All Paper

Reﬂow/Wave

Paper/Embossed

Reﬂow/Wave

Paper/Embossed

(in.)

WVDC

0.5

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

100

120

150

180

220

270

330

390

470

560

680

750

820

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

0.010

0.012

0.015

0.018

0.022

0.027

0.033

0.039

0.047

0.068

0.082

0.1

0.40 ± 0.02

0.60 ± 0.09

1.00 ± 0.10

1.60 ± 0.15

2.01 ± 0.20

3.20 ± 0.20

(L) Length

(0.016 ± 0.0008) (0.024 ± 0.004)

(0.040 ± 0.004)

(0.063 ± 0.006)

(0.079 ± 0.008)

(0.126 ± 0.008)

0.20 ± 0.02

(0.008 ± 0.0008) (0.011 ± 0.004)

0.10 ± 0.04 0.15 ± 0.05

(0.004 ± 0.0016) (0.006 ± 0.002)

0.30 ± 0.09

0.50 ± 0.10

(0.020 ± 0.004)

0.25 ± 0.15

(0.010 ± 0.006)

0.81 ± 0.15

(0.032 ± 0.006)

0.35 ± 0.15

(0.014 ± 0.006)

1.25 ± 0.20

(0.049 ± 0.008)

0.50 ± 0.25

(0.020 ± 0.010)

1.60 ± 0.20

(0.063 ± 0.008)

0.50 ± 0.25

(0.020 ± 0.010)

W) Width

(t) Terminal

100

200

100

200

250

100

200

250

500

Cap

(pF)

Cap

(μF)

WVDC

SIZE

0101*

0402

0603

100

200

100

0805

200

250

100

1206

200

250

500

0201

Letter

Max.

0.33

0.22

0.56

(0.022)

0.71

(0.028)

0.90

(0.035)

0.94

(0.037)

1.02

(0.040)

1.27

(0.050)

1.40

(0.05 5)

1.52

(0.060)

1.78

(0.070)

2.29

(0.090)

2.54

(0.100)

2.79

(0.110)

Thickness (0.013) (0.009)

PAPER

EMBOSSED

The Important Information/Disclaimer is incorporated in the catalog where these speciﬁcations came from or

available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

080420

C0G (NP0) Dielectric

Capacitance Range

PREFERRED SIZES ARE SHADED

SIZE

1210

1812

1825

2220

2225

Soldering

Packaging

Reﬂow Only

Paper/Embossed

Reﬂow Only

All Embossed

Reﬂow Only

All Embossed

Reﬂow Only

All Embossed

Reﬂow Only

All Embossed

(in.)

3.20 ± 0.20

(0.126 ± 0.008)

4.50 ± 0.30

(0.177 ± 0.012)

4.50 ± 0.30

(0.177 ± 0.012)

5.70 ± 0.40

(0.225 ± 0.016)

5.72 ± 0.25

(0.225 ± 0.010)

(L) Length

(in.)

2.50 ± 0.20

(0.098 ± 0.008)

3.20 ± 0.20

(0.126 ± 0.008)

6.40 ± 0.40

(0.252 ± 0.016)

5.00 ± 0.40

(0.197 ± 0.016)

6.35 ± 0.25

(0.250 ± 0.010)

W) Width

(in.)

0.50 ± 0.25

(0.020 ± 0.010)

0.61 ± 0.36

(0.024 ± 0.014)

0.61 ± 0.36

(0.024 ± 0.014)

0.64 ± 0.39

(0.025 ± 0.015)

0.64 ± 0.39

(0.025 ± 0.015)

(t) Terminal

WVDC

3.9

4.7

100

200

500

100

200

500

100

200

100

200

100

200

Cap

(pF)

5.6

6.8

8.2

100

120

150

180

220

270

330

390

470

560

680

820

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

0.010

0.012

0.015

0.018

0.022

0.027

0.033

0.039

0.047

0.068

0.082

0.1

100

1812

Cap

(pF)

WVDC

SIZE

100

1210

200

500

200

500

100

1825

200

100

2220

200

100

2225

200

Letter

Max.

Thickness

0.33

(0.013)

0.22

(0.009)

0.56

(0.022)

0.71

(0.028)

0.90

(0.035)

0.94

(0.037)

1.02

(0.040)

1.27

(0.050)

1.40

(0.055)

1.52

(0.060)

1.78

(0.070)

2.29

(0.090)

2.54

(0.100)

2.79

(0.110)

PAPER

EMBOSSED

The Important Information/Disclaimer is incorporated in the catalog where these speciﬁcations came from or

available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

080420

型号:	06035A102FAT2A
是否无铅：	不含铅
是否Rohs认证：	符合
生命周期：	Active
零件包装代码：	0603
包装说明：	, 0603
Reach Compliance Code：	compliant
ECCN代码：	EAR99
HTS代码：	8532.24.00.20
Factory Lead Time：	12 weeks
风险等级：	1.27
电容：	0.001 µF
电容器类型：	CERAMIC CAPACITOR
介电材料：	CERAMIC
高度：	0.9 mm
JESD-609代码：	e3
长度：	1.6 mm
安装特点：	SURFACE MOUNT
多层：	Yes
负容差：	1%
端子数量：	2
最高工作温度：	125 °C
最低工作温度：	-55 °C
封装形状：	RECTANGULAR PACKAGE
封装形式：	SMT
包装方法：	TR, PAPER, 7 INCH
正容差：	1%
额定（直流）电压（URdc）：	50 V
尺寸代码：	0603
表面贴装：	YES
温度特性代码：	C0G
温度系数：	30ppm/Cel ppm/ °C
端子面层：	Tin (Sn) - with Nickel (Ni) barrier
端子形状：	WRAPAROUND
宽度：	0.81 mm
Base Number Matches：	1

电子百科

产品导航

产品型号06035A101KAT2A的概述

产品型号06035A101KAT2A的Datasheet PDF文件预览

06035A101KAT2A相关产品..

06035A101KAT2A相关文章

IC37:专业IC行业平台