RSF 3
RSF 1
Screw Clamp Connections
Spring Loaded
Available Options
Version
Part No.
0497560000
9501160000
Part No.
Molding material
TS 32 Polyamide
TS 35 Polyamide
TS 32 Melamlne
0270320000
Dimensions
Width / Length / Height mm (in.)
with TS 32
mm (in.)
8/50/60 (.31/1.97/2.36)
12 (.47)
11/50/60 (.43/1.97/2.36)
12 (.47)
Insulating stripping length
Technical Data
Rated voltage / rated current / wire size
UL
600 V / 25 A / #22…12 AWG
600 V / 40 A / #14…8 AWG
CSA
600 V / 25 A / #22…12 AWG
300 V / 50 A / #14…8 AWG
Terminal Rail (2 m)
Type
Part No.
0122800000
0676100000
Type
Part No.
0122800000
0676100000
Steel
TS 32
TS 32
TS 32
TS 32
Steel (M6 Slots)
Locking pin (1 m)—optional
Steel
SST 3
0152700000
0206160000
SST 3
0152700000
0206160000
End Bracket (thickness mm)
EWK 1 (8.5)
EWK l (85)
End Plate (thickness mm)
Partition (thickness mm)
Polyamide
Melamine
AP (3)
0270460000
AP (3)
0270420000
Polyamide
TW (1.5)
3877960000
Resin bonded paper
Resin bonded paper
Polyamide
TW (2)
3833500000
0474700000
0319160000
TW (2)
3833500000
0474700000
TW (0.5)
TSch 1
TW (0.5)
Small partition
Jumper
Note: Final number in model indicates
no. of poles (e.g. QL 2 = 2 poles).
For additional information, see Accessories section.
QL 2
0194300000
0194400000
0194500000
0338300000
0248500000
0303000000
QL 2
0267400000
0267500000
0267600000
0341700000
0285200000
0292500000
0164400000
QL 3
QL 3
QL 4
QL 4
QL 10
QL 10
VH 17.5
BS (M3 x 25)
SS
Sleeve
VH 13.5
BS (M3 x 20)
Screw
Washer
Switching Link
2-way
Sleeve
Screw
VL 2
0528400000
0309400000
0309800000
VH 27
BS (M3 x 35)
Test Plugs
Plug
PS (2.3Ø)
StB 14
0180400000
0168600000
PS (4Ø)
StB 18
0299600000
0286500000
Plug bolt
Cover (1 m)
Transparent cover
Support bracket
ADP 2
HP 2
0485300000
0485660000
ADP 2
HP 2
0485300000
0485660000
Hooked Blade Crimp*
#22…16 AWG
#16…14 AWG
#12…10 AWG
9100500000
9100600000
9100200000
9100300000
9100400000
Marking Tags
All marking systems are shown in Accessories Section.
DEK 5/8
DEK 5/8
1653340001
1653350001
DEK 5/8
DEK 5/8
1653340001
1653350001
*To accommodate two hooked bladed crimps back-to-back per terminal, one
should be located in the current bar slot, the second through the lower part of the clamp.
176