350789-3各脚功能电路原理芯片引脚定义引脚图及功能IC贸易商-中国IC网-芯三七

TE Connectivity

2-Piece Power Connectors

Quick Reference Guide

2-Piece Power Connectors

THINGS TO CONSIDER WHEN CHOOSING POWER CONNECTORS

Application. Does the application require a board-to-board, wire-to-board, wire-to-wire, bus bar, card edge

or a combination of these types of connectors?

Current and Voltage. Does the connector require power only, or a combination of power and signal?

How much current is required in the application? Keep in mind that power connector performance is

typically measured in amperes (or amps). The voltage is also very important as it deﬁnes the spacing

between the contacts.

Hot-Pluggability. Will the application be mated while under electrical load? If so, a hot-pluggable connector

is required. Many of the products in this guide have been approved for use in hot-plug applications.

TYPICAL POWER CONNECTOR APPLICATIONS

• AC to DC and DC to DC

• Power Supplies

• High End Computers

• Servers

• High Density Power Distribution

• Uninterruptible Power Supplies (UPS)

• Removable Battery Packs

• Board Stacking

• Data Storage Equipment

• Telecommunications Switches

• Power Distribution

te.com/powerconnectors

TE Connectivity

2-Piece Power Connectors

Application: Hot Swappable Power Supplies (500w–5KW)

CHARACTERISTICS

Connector

MULTI-BEAM XLE

FLATPAQ

MINIPAK HDL

Current Rating

Vented Housings

Up to 75 A*

32 Amps*

Up to 40 Amps*

l

Licensed —

Second source

l

Height (mm)

12 mm

14 mm

8 mm - 9 mm

Modular

l

Active Guides

Customizable

l

* Single contact current rating

te.com/products/multibeamxle

te.com/products/minipakhdl

MULTI-BEAM XLE Connector

FLATPAQ Connectors

MINIPAK HDL Connector

• New 6 beam power contact oﬀers up to

75 A current rating and delivers more

than 200 Amps/linear inch

• 32 Amp high-performance

CROWN BAND power contacts

• High-density, low proﬁle, power/signal,

blind-mate connector

• True hot-plug power contacts available

• Developed to meet next generation

1U application by reducing airﬂow

impedance

• New 25A low power contact occupies

50% less pcb space than MULTI-BEAM XL

power contacts

• Versatile modular design allows low

volume customized conﬁgurations to

meet your speciﬁc application

requirements

• Hot-pluggable power supplies

• New slim guide sockets reduce the

overall PCB footprint

• Contacts rated up to 40 amps and

deliver more than 150 amps per

linear inch

• Solder and compliant press-ﬁt

termination options available

• Vented housing allows for better heat

dissipation

• Rugged design features active guide pins

Reference Part Numbers*

2-1926732-5

2-1926733-5

• Hot-plug capable

Reference Part Numbers*

6646597-1

6646722-1

Reference Part Numbers*

6450830-2

1926845-6

6450850-2

Rechargeable Batteries (for portable/hand-held electronic devices)

RECHARGEABLE BATTERIES

Part Number

1827684-1

1827654-1

1-1123688-7

6123978-1

120591-1

Pitch (mm)

No. of Positions

Mount

Style

Receptacle

Plug

2

7

10

4

1

/

Vertical Surface Mount

Right Angle Thru-Hole

Vertical Surface Mount

Right Angle Thru-Hole

Horizontal Thru-Hole

Vertical Solder

2.5

/

Receptacle

Plug

Coin Cell

Battery Interconnects

5787430-1

5787441-1

5

Right Hand Plug

Keyless Plug

5

/

Right Angle Solder

• Current capacity — 7 Amps/single

contact at 30° T-Rise

• Choice of right angle or vertical mount

headers with left, right or keyless

polarization

• 5 mm pitch headers available for 7.2, 10.8

and 12.0 volts rechargeable batteries

*Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers.

te.com/powerconnectors

TE Connectivity

2-Piece Power Connectors

Application: Backplanes

PRODUCTS

Amps/Linear Inch

Universal Power Module

MULTIGIG RT

ICCON

MINIPAK HDE

Stacked ICCON

< 125

l

125 – 175

175 – 225

> 225

l

te.com/products/upm

te.com/products/iccon

Universal Power Module (UPM)

Connectors (Slim UPM shown)

MULTIGIG RT Connectors

• 2 mm backplane connectors

ICCON Connectors

• With and without locking feature

• Varieties of UPM include: standard,

high current, slim, low proﬁle

• 2 performance levels

• Standard 10 amp contact

• High current 16 Amp contacts

• True hot-plug contacts

• High reliability — up to 250 cycles

• Diﬀerent conﬁgurations include right

angle, vertical, coplanar and mezzanine

• 20 Amp contacts

• Three contact mating lengths are

available in 1.5 mm sequence levels

• 1 and 2 row versions to provide maximum

trace routing ﬂexibility

• True hot-plug contacts

Reference Part Numbers*

1-1410271-1 (Plug)

1410270-2 (Receptacle)

• 35A current rating

• Slimline version available, 30% smaller

footprint

• Board-to-board, board–to-busbar, and

wire-to-board application options

• Durable, quick connect/disconnect

function for high current space

constrained applications

Reference Part Numbers*

6643274-1 (Vertical Pin),

6643228-1 (R/A Pin),

Reference Part Numbers*

1903977-1 (Slim UPM), 1645498-2

(Vertical Plug), 5646954-2 (R/A Plug)

6643220-1 (SLIMLINE Socket)

te.com/products/minipakhde

te.com/products/iccon

MINIPAK HDE Connectors

Stacked ICCON Connector

• Designed to compliment other backplane

connectors oﬀered by TE including

Z-PACK HM-Zd, Z-PACK TinMan and

other connectors

• Very High Current Density — Up to

200 Amps per inch

• Occupies less PCB edge space than

separate ICCON power and guide

modules

• Right angle connector to mate

motherboard-to-daughterboard

power distribution systems

• Ground pin, power pin and

mate-ﬁrst-break-last pin options

• Very high current density — 18 Amps

per contact, over 250 Amps/linear inch

• Two levels of contact sequencing for

mate-ﬁrst-break-last operation

• Designed to compliment Z-PACK and Reference Part Numbers*

other backplane connectors

2085181-1 (R/A Socket)

1766663-1 (Vertical Pin)

Reference Part Numbers*

1926226-1 (2x6), 1926229-1 (2x9)

*Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers.

te.com/powerconnectors

TE Connectivity

2-Piece Power Connectors

Application: Cable Power

CABLE POWER

Products

Wire Size

26-8 AWG

14-10 AWG

12-0 AWG

Current Rating

Specialty

Low, high power options in

same connector

MULTI-BEAM XLE

ET POWER

up to 50 Amps

up to 35 Amps

50-250 Amps

Low proﬁle

BusBar Quick Connect/

Disconnect

RAPID LOCK

High Current Universal

MATE-N-LOK

Panel mount or

30-10 AWG

up to 35 Amps

free hanging versions

Single & 2 pole

AMP Power Series

Wave Crimp

300MCM-0 AWG

Flat Cable

15-275 Amps

40-110 Amps

Quick Connect/Disconnect

Flat

te.com/products/multibeamxle

te.com/products/wavecrimp

te.com/products/amppowerseries

MULTI-BEAM XLE Cable Receptacles

AMPOWER Wave Crimp System

AMP Power Series Connectors

• X, Y, Z ﬂoat mount, blind-mate

connectors for drawer type applications

• Allows more angular misalignment than

the original MULTI-BEAM XL connector

• Modular design to meet any

application

• Hot-Pluggable

• Flat cable, dissipates heat better than

round wire

• Termination of ﬂat cable requires

no stripping. Provides a reliable low

resistance, gas tight interface

• Single pole and 2-pole connector

housings, crimp snap-in contacts, and

accessories

• Rugged contact design

• Open barrel contacts 6-20AWG on

reels for automatic and semiautomatic

machine termination

• Lower operating temperature than

standard round/discrete wires

• Easily formed into shape, without

cable ties

• Lower cost than laminated bus bars

• Compatible with industry alternate

standard versions

• Panel Mount, Slide-to-Lock and

Squeeze-to-Release conﬁgurations are

available

te.com/products/universalmatenlok

te.com/products/rapidlock

te.com/products/etpower

High Current Universal MATE-N-LOK II

Connectors

• Available in 2-15 circuit sizes for free

hanging, panel mount, or wire-to-board

connection

• Louvertac band and screw machined

contacts provide very high current with

low contact resistance

RAPID LOCK Bus Bar Connectors

ET Power Connector

• Locking feature retains each contact to

mating pin

• Up to 35Amps per contact

• End-to-end stackability

• No installation tools required

• Low proﬁle, less than 8 mm above PCB

• Cable-to-PCB applications

• Positive latch retention

• Fast, reliable replacement for power

lugs

• Up to 250 Amps per contact; very low

contact resistance

• No extraction tools required/economical

• Pin and sockets can be intermixed in

• Right angle and vertical mounts

the same housing

te.com/powerconnectors

TE Connectivity

2-Piece Power Connectors

Industry Standards

PRODUCTS

Standards

Z1 Power Connector

MINIPAK HD

Guide Hardware

MULTI-BEAM XLE

Advanced TCA

PICMG MicroTCA.0

VITA 41

1766500-1

1-1469373-1

1469920-1

1410465-1

1410956-1

VITA 46

VITA 62

6450843-6

Note: Part numbers listed in the above table are some available samples for each standard. There are other part numbers and conﬁgurations to choose from.

AdvancedTCA

MicroTCA

VITA 41

VITA 46

VITA 62

The PICMG 3.0

The PICMG

Referred to as VXS-

VME Switched Serial in

the next generation of

VME backplanes and

introduces features like

improved bandwidth,

backward compatibility

and increased power

delivery into the existing

VMEbus technology.

Based on VMEbus

The latest in VITA

AdvancedTCA standard

deﬁnes architecture

for modular computing

components within

communications network

infrastructure. The

standardization focuses

on providing superior

power and cooling

capabilities in solutions

that are cost eﬀective,

highly available and

highly scalable.

MicroTCA.0 standard is

complimentary to the

AdvancedTCA standard,

but is optimized for

smaller scale and

more price sensitive

applications.

technology, the standard Standards, VITA 62 is

is deﬁned for 3U and 6U

formats and merges the

latest in connector and

packaging technology

currently being deﬁned

and will use the standard

VPX 3V16U form factor and

comply to requirements

with the latest in bus and deﬁned in VITA. 48.0. VITA

serial fabric technology.

62 will deﬁne the power

generation requirements

for a module that can be

used to power systems

that support a VITA 62 slot

on the VPX backplane.

te.com/products/guidehardware

te.com/products/multibeamxle

te.com/products/atcapower

Guide Hardware

MULTI-BEAM XLE Connector

Z1 Power Connector

• Guide modules are available for the

AdvancedTCA, VITA 41.0 VXS and the

VITA 46.0 VPX standards

• Most guide modules are keyed to

prevent misalignment during board-

to-board mating

• ATCA guide modules are available

for a variety of applications including

front board, mid plane, backplane and

rear transition modules as speciﬁed in

the AdvancedTCA speciﬁcation

• VITA 62 standard developed around

MULTI-BEAM XLE connector

• Designed to PICMG 3.0 AdvancedTCA

standard

• New 6 beam power contacts oﬀer

a 50A current rating and lower

mating force

• New 20A low power contact

occupies 50% less PCB space than

MULTI-BEAM XL power contacts

• Combines 8 high conductivity size 16

pin & socket contacts with 22 size 22

pin & socket contacts

• Capable of carrying 20 Amps per

contact and the signals are capable

of carrying 2 Amps per contact

• Vented housing allows for better heat

dissipation

• MULTIGIG RT guide modules meet

the VITA 46.0 VPX and VITA 41 VXS

standards

MINIPAK HD Connectors

• Designed to the MicroTCA.0 standard

• 30 microinches gold plating over

nickel

• Hot-plug contact design controls arc

during hot-mate/un-mate cycles

• Available to carry up to 14.5 Amps

per contact fully loaded

te.com/products/minipakhd

For more information on TE Industry

Standard Products visit:

te.com/products/atca

AdvancedTCA, MicroTCA and PICMG are trademarks of

PICMG-PCI Industrial Computer Manufacturers Group, Inc.

VITA, VMEbus, VPX, and VXS are trademarks of VITA.

te.com/powerconnectors

Application Diagram

TE Connectivity

2-Piece Power Connectors

Integrated Backplane Power Systems

• Universal Power Modules (UPM)

• MINIPAK HDE Connectors

• MULTIGIG RT Power Modules

• Guide Hardware

• Z1 Power (AdvancedTCA)

Connectors

Bus Bar-to-Board

• ICCON Connectors

Laptops/Portables

• Battery Interconnects

• RAPID LOCK Connectors

Power — Board-to-Board

Power — Cable-to-Cable/Board

• Universal MATE-N-LOK Product

• AMPOWER Wave Crimp System

• ET Power Connector

• MULTI-BEAM XLE Connectors

• FLATPAQ Modular Connectors

• MINIPAK HDL Connectors

• MINIPAK HD (MicroTCA)

Connectors

• MULTI-BEAM XLE Cable Receptacles

• RAPID LOCK Connectors

FOR MORE INFORMATION

TE Technical Support Center

Visit Us On the WEB!

For your power connector needs go to:

te.com/products/powerconnectors

Check out our selection of videos on YouTube!

USA:

+1 (800) 522-6752

Canada:

Mexico

Latin/S. America:

Germany:

UK:

France:

Netherlands:

China:

+1 (905) 475-6222

+52 (0) 55-1106-0800

+54 (0) 11-4733-2200

+49 (0) 6251-133-1999

+44 (0) 800-267666

+33 (0) 1-3420-8686

+31 (0) 73-6246-999

+86 (0) 400-820-6015

Refer to our catalog:

Power Connectors & Interconnection Systems

Catalog # 1773096

Sample Kits!

Sample kits are available for various Power Connectors.

Contact your local TE Sales Representative for more

information or visit www.te.com

Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.

*as deﬁned www.te.com/leadfree

Most products in this brochure have been

qualiﬁed by UL and/or CSA.

te.com

4-1773458-1 CIS LUG FP 1M 02/2012

AMP, AMPOWER, CROWN BAND, FLATPAQ, ICCON, MATE-N-LOK, MINIPAK HDE, MINIPAK HDL,

MULTI-BEAM XL, MULTI-BEAM XLE, MULTIGIG RT, RAPID LOCK, Z-PACK, Z-PACK TINMAN, TE Connectivity,

TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and/or company names might be

trademarks of their respective owners.

While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is

error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current.

TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all

implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or

ﬁtness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice.

tSepe.cciﬁocamtion/sparoe wsubejercct toocnhanngeecwtitohorust notice. Consult TE for the latest dimensions and design speciﬁcations.

型号:	350789-3
Brand Name：	AMP
是否无铅：	不含铅
是否Rohs认证：	符合
生命周期：	Active
IHS 制造商：	TE CONNECTIVITY LTD
包装说明：	ROHS COMPLIANT
Reach Compliance Code：	compliant
ECCN代码：	EAR99
HTS代码：	8536.69.40.30
Factory Lead Time：	15 weeks
风险等级：	0.77
Is Samacsys：	N
其他特性：	MATE-N-LOK
主体宽度：	0.3 inch
主体深度：	0.55 inch
主体长度：	0.8 inch
主体/外壳类型：	PLUG
连接器类型：	COMBINATION LINE CONNECTOR
联系完成配合：	NOT SPECIFIED
联系完成终止：	Matte Tin (Sn) - with Nickel (Ni) barrier
触点性别：	MALE
触点材料：	PHOSPHOR BRONZE
触点模式：	RECTANGULAR
触点样式：	RND PIN-SKT
DIN 符合性：	NO
介电耐压：	2900VAC V
空壳：	NO
滤波功能：	NO
IEC 符合性：	NO
绝缘电阻：	100000000 Ω
绝缘体颜色：	WHITE
绝缘体材料：	NYLON
JESD-609代码：	e3
MIL 符合性：	NO
制造商序列号：	350789
插接触点节距：	0.25 inch
插接信息：	350766-1
混合触点：	NO
安装选项1：	FRICTION RAMP
安装选项2：	LOCKING
安装方式：	STRAIGHT
安装类型：	BOARD
连接器数：	ONE
PCB行数：	1
装载的行数：	1
最高工作温度：	105 °C
最低工作温度：	-55 °C
选件：	GENERAL PURPOSE
PCB接触模式：	RECTANGULAR
电镀厚度：	30u inch
极化密钥：	POLARIZED HOUSING
额定电流（信号）：	19 A
参考标准：	UL
可靠性：	COMMERCIAL
外壳材料：	POLYAMIDE
子类别：	Headers and Edge Type Connectors
端子长度：	0.155 inch
端子节距：	6.35 mm
端接类型：	SOLDER
触点总数：	3
UL 易燃性代码：	94V-0
Base Number Matches：	1

电子百科

产品导航

产品型号350789-3的概述

产品型号350792-1的Datasheet PDF文件预览

350789-3相关产品

350789-3相关文章

IC37:专业IC行业平台