Features
■ Marking on contrasting background for
permanent identification
■ RoHS compliant*
■ Low profile is compatible with DIPs
■ Wide assortment of pin packages enhances
design flexibility
■ Ammo-pak packaging available
■ Recommended for rosin flux and solvent
clean or no clean flux processes
4600X Series - Thick Film Conformal SIPs
Package Power Temp. Derating Curve
Product Characteristics
Product Dimensions
Resistance Range
5.08
(.200)
MAX.
A
....................10 ohms to 10 megohms
Maximum Operating Voltage.........100 V
Temperature Coefficient of Resistance
50 Ω to 2.2 megohms ... 100 ppmꢀ/C
below 50 Ω.................... 250 ppmꢀ/C
above 2.2 megohms ..... 250 ppmꢀ/C
TCR Tracking........................ 50 ppmꢀ/C
maximum; equal values
MAXIMUM
3.50
3.00
2.50
PIN #1
REF.
MAX. 1.24
3.3 +0.5/-0.3
(.130 +.020/ -.012)
BOTH ENDS (.049)
.508 .050
(.020 .002)
2.00
TYP.
4614X
Resistor Tolerance............... See circuits
Insulation Resistance
2.54 .07
4612X
1.50
(.100 .003*)
4610X
................10,000 megohms minimum
Dielectric Withstanding Voltage
...........................................200 VRMS
Operating Temperature
TYP.
Pin
A Maximum
Count mm (Inches)
NON-ACCUM.
4608X
1.00
4606X
4
5
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
4604X
.50
6
2.49
(.098)
...............................-55 /C to +125 /C
7
MAX.
8
9
Environmental Characteristics
0
25
70
AMBIENT TEMPERATURE ( C )
125
10
11
12
13
14
°
TESTS PER MIL-STD-202........ΔR MAX.
Short Time Overload ................ 0.25 ꢁ
Load Life................................... 1.00 ꢁ
Moisture Resistance................. 0.50 ꢁ
Resistance to Soldering Heat
.............................................. 0.50 ꢁ
Terminal Strength ..................... 0.25 ꢁ
Thermal Shock ......................... 0.25 ꢁ
.254 .050
(.010 .002)
MAX.
Package Power Ratings (Watts)
Ambient
Temp.
70 °C
Ambient
Temp.
70 °C
Maximum package length is equal to 2.54mm (.100") times the
number of pins, less .005mm (.002").
Pkg.
Pkg.
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
4604X
4605X
4606X
4607X
4608X
4609X
0.50
0.63
0.75
0.88
1.00
1.13
4610X
4611X
4612X
4613X
4614X
1.25
1.38
1.50
1.63
1.75
Physical Characteristics
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
Flammability ........Conforms to UL94V-0
Body Material ...................... Epoxy resin
Standard Packaging
..................Bulk, Ammo-pak available
For Standard Values Used in
Capacitors, Inductors, and Resistors,
click here.
How To Order
Typical Part Marking
Represents total content. Layout may
vary.
46 06 X - 101 - 222 __ LF
Model
(46 = Conformal
SIP)
Number of Pins
Physical Configuration
(X = Thick Film Low Profile)
Part Number
Marking
4606X-101-RC
4608X-102-RC
4610X-104-RCꢀRC
6X-1-RC
8X-2-RC
10X-4-RCꢀRC
Electrical Configuration
• 101 = Bussed
RC = ohmic value, 3-digit resistance
code.
• 102 = Isolated
• 104 = Dual Terminator
• AP1 = Bussed Ammo**
• AP2 = Isolated Ammo**
• AP4 = Dual Ammo**
CIRCUIT
NUMBER OF PINS
RESISTANCE
CODE
6X-2-222
YYWW
Resistance Code
DATE CODE
PIN ONE
INDICATOR
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
MANUFACTURER'S
TRADEMARK
Resistance Tolerance
• Blank = 2 ꢁ (see ꢂResistance Tolerance”
on next page for resistance range)
• F = 1 ꢁ (100 ohms - 5 megohms)
Terminations
• All electrical configurations EXCEPT 104 & AP4:
LF = SnꢀAgꢀCu-plated (RoHS compliant)
• ONLY electrical configurations 104 & AP4:
L = SnꢀAgꢀCu-plated (RoHS compliant)
Consult factory for other available options.
**Available for packages with 10 pins or less.
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
QQ：2881495808 复制
