5021T-E 22 GHz 1310 nm
DFB Transmitter
DATASHEET | AUGUST 2013
MICROWAVE
DC Monitor Voltages
Laser DC Current, Pin 8:
1 V/100 mA (into 1 MOhm load)
Alarm Circuits
Summary Alarm, Pins 7 & 9:
Closed when unit is OK. Open if fault or no DC power.
The alarm is a dry, form A contact. The alarm is a summary of :
1. +5 VDC Regulator
2. Laser Temperature
3. Laser Optical Power
Front Panel LEDs
Power On
Laser Temperature Stable
Laser Power Stable
Order Information
Model Number
Description
5021T-E-1309-SA
Transmitter, 22 GHz, SMA, 1310 nm, 9 dBm, SC/APC
5021T-E-1309-FA
Transmitter, 22 GHz, SMA, 1310 nm, 9 dBm, FC/APC
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser
product. This device has been classified with the FDA/CDRH under accession number 0220191. All versions of this laser are Class
1M laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007. An additional warning for Class 1M laser products.
For diverging beams, this warning shall state that viewing the laser output with certain optical instruments (for example: eye
loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. For collimated beams, this warning
shall state that viewing the laser output with certain instruments designed for use at a distance (for example: telescopes and
binoculars) may pose an eye hazard.
Wavelength = 1.3/1.5 μm.
Maximum power = 30 mW.
*Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
*IEC is a registered trademark of the International Electrotechnical Commision.
© 2013 EMCORE Corporation | REV 2013.08
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
+1 626-293-3400
satcom-sales@emcore.com
www.emcore.com