5222132-1应用文章市场行情现货热卖使用介绍供应商报价-中国IC网-芯三七

产品型号52223的Datasheet PDF文件预览

Features

•

Five programmable Initiating Device Circuits

(zones). Each zone may be programmed for:

two-wire smoke detectors, normally open

contact devices (pull stations, heat detectors),

four-wire smoke detectors, waterflow

operation, supervisory operation, auto-reset

supervisory operation.

Flex 405

Fire Alarm Control Panel with built-in DACT

and remote-site upload/download capability

•

Two built-in, Class A or B (Style Z or Y)

NotificationAppliance Circuits (NACs).

NACs may be programmed: silenceable,

non-silenceable (a strobe circuit can keep

flashing after the panel is silenced), auto-

silence (program 5 to 30 minutes), silence

inhibit (60 seconds), coding (march time,

temporal, California).

Description

The Gamewell Flex 405 is a 24-volt,

five-zone Fire Alarm Control Panel

FACP) with built-in communicator and

remote-site upload/download capabil-

•

3.0 amps of notification appliance power,

expandable to 5.0 amps (meets the critical

power requirements forADAand UL-1971

devices).

ity. The integral communicator trans-

•

Two built-in Form-CAlarm andTrouble relays.

Supervisory and communication fail outputs.

Dual-line rotary- or Touch-Tone®-dial DACT

interfaces to public telephone network (leased

phone lines are not required).

mits event information (alarms,

troubles, supervisories, faults, etc.) to

a UL-Listed central station. The Flex

405 may be used in a variety of cost-

effective applications, including: local

fire alarm control panel (communica-

tor disabled), fire alarm control panel/

communicator, stand-alone sprinkler

•

24-Volt operation.

Built-in voltmeter measures: zone voltage;

primaryAC line voltage; battery voltage;

NAC(s) voltage; resettable 24-volt power.

Surface Mount Technology (SMT).

Fully programmable via built-in keypad (no

costly external programmers necessary).

Complies with NFPA 72 (Local, Central

Station and Remote Station [DACT only – not

polarity reversal] FireAlarm Systems).

Reporting formats include:

3+1, 4+1, 4+2 Standard + Expanded;

4+1, 4+2, Ademco Express.

Integral battery charger for up to 60 hours of

standby power.

Fuseless, power-limited technology meets

UL power-limiting requirements.

Programmable alarm presignal timer, alarm

verification timer, and optional trouble

reminder.

•

supervisory communicator, or slave

communicator to a UL-Listed host fire

alarm panel (requires normally-open dry

•

contacts to trigger five channels). Selectable transmission formats allow the

Flex 405 to communicate to virtually all central stations.

Remote-Site Upload/Download

•

The Flex 405 may be downloaded or uploaded without affecting the system fire

protection. Download system programming, and upload key system information

such as: current system status, history and walk test files; zone, AC line, NAC

1 and NAC 2, resettable power and battery voltages; and system programming.

Upload or download within one minute without affecting normal fire panel func-

tions. The upload/download function also features multiple security techniques.

The Flex 405 requires the PK-CD programming kit, which works with most Hayes-

compatible modems (consult factory for listing).

•

Single-person walk test. Fire drill function.

Zone disable capability (software).

32-Event history buffer with time-and-date

stamp.Accurate real-time clock/calendar.

•

Extensive built-in transient protection.

Electronics and operational controls fully

enclosed in a lockable cabinet capable of

housing up to 7AH batteries.

•

Optional: contact-by-zone module, remote

annunciator, printer interface for on- or off-line

printing.

Listings

Listings and approvals below apply to the

basic Flex 405 panel. In some cases, certain

modules may not be listed by certain

approval agencies, or listing may be in

process. Consult factory for latest listing

status.

•

UL Listed.

CSFM approved: file 7165-1288:179.

MEA approved: file 366-04-E.

Flex 405 CS-2405 09/01/06

Page 1 of 4

Specifications

• Single PC board design using Surface Mount

Technology (SMT).

• Two modular telephone jacks for connection to

Ordering Information

F405

Five-zone, 24-volt fire alarm control communicator. Includes

RJ31X/modules.

backbox, transformer, technical manual, and frame-and-post

operating instruction sheet.

AC power

• 120 VAC, 50/60 Hz, 2.3 A.

• Wire size: minimum 14AWG

(2.0 mm²) with 600-volt insulation.

XRM-24

120 VAC, 100 VA transformer expands NAC power from 3.0

to 5.0 amps.

• Built-in brownout circuitry, built-in voltmeter.

Communicator

• One line-active indicator for each of two

phone lines.

SAN-405

Five-zone remote annunciator (RZA-5F), mounts to a single-

gang box (requires ADM-24).

• “Kiss-Off” signal LED.

ADM-24

RM-5F

Annunciator driver module (supports SAN-405).

Five-zone relay module, provides contact-by-zone.

• Dual “low telephone voltage detect” circuitry.

• Programmable event codes per each format.

• Up to 62 transmitted events/messages.

Selectable/deselectable transmissions of 62

events.

• Five zones may be configured to five

channels as a slave communicator (channels

are auto-resettable.

CAC-5F

Class A converter module. Converts all Class B initiating

device circuits (zones) to Class A.

PRT-24

PK-CD

Printer interface module, provides an EIA-232 printer output.

Includes cable, DB9F and DB25 adapter.

Communication formats

Express formats allow complete transaction to

be communicated in under five seconds.

• 20 PPS, 3+1 standard & expanded.

• 20 PPS, 4+1 standard & expanded.

• 20 PPS, 4+2 standard & expanded.

• 4+1 and 4+2Ademco Express.

Contains programming software for Windows®-based PC

computer (cable not included).

MCBL-7

BB-17F

TR-3-R

52223

DACT phone cord, 7 feet (2.134 m) long (two required).

Battery backbox, required for batteries over 7 AH.

Trim ring.

Initiating device circuits (zones)

• The Flex 405 includes five programmable

initiating device circuits (zones). Circuits 1, 2, 4,

and 5 are Style B (Class B). Circuit 3 is Style

D (Class A). Use Class A converter module

(P/N CAC-5F) to convert Class B IDCs to

Class A.

Flex 405 Installation and Maintenance Manual.

• Each zone may support two-wire smoke

detectors. Programming options include:

waterflow (silenceable/non-silenceable),

supervisory (standard/auto-reset), pull station,

normally-open-contact device.

• All circuits are power-limited and supervised.

• All circuits allow up to 100 ohms of line

resistance. Use 12 to 18 AWG wire (3.1 to

0.78 mm²).

Notification appliance circuits

• Two Style Z/Y (Class A/B) @ 2.5 A each.

• All circuits are fully power-limited

and meet UL power-limiting requirements.

Auxiliary outputs

• Resettable four-wire smoke detector power @

300 mA. Non-resettable power @ 300 mA.

• Integral Form-C Alarm and Trouble relays.

• Relay drivers for supervisory and

communication fail.

Cabinet specifications

• The compact cabinet can be surface- or semi-

flush-mounted.

• Knockouts on the top, sides, and back

provide ease of wire entry.

• Dimensions, Door: 15.219” high x 14.219” wide

(38.655 cm H x 36.115 cm W). Backbox: 15.0”

high x 14.5” wide x 3.0” deep (38.1 cm H x

36.83 cm W x 7.62 cm D). Trim ring (P/N TR-

1-R): 18.125” high x 17.62” wide (46.038 cm H

x 44.755 cm W).

Page 2 of 4

Flex 405 CS-2405 09/01/06

UL-Listed Receivers Compatible

with the Flex 405

Osborne

Hoffman

Models

1 & 2

Silent

Knight

9000

ITI

CS-4000

(3)

Radionics

6000/6500

(5)

Sescoa

3000R

(7)

SurGuard

MLR-2

(9)

Format #

(Addresses 16 & 42)

Ademco

685 (1)

FBI

CP220FB

4+1 Ademco Express

4+2 Ademco Express

3+1/Standard/1800/2300

3+1/Expanded/1800/2300

3+1/Standard/1900/1400

3+1/Expanded/1900/1400

4+1/Standard/1800/2300

4+1/Expanded/1800/2300

4+1/Standard/1900/1400

4+1/Expanded/1900/1400

4+2/Standard/1800/2300

4+2/Expanded/1800/2300

4+2/Standard/1900/1400

4+2/Expanded/1900/1400

(NOT USED)

4 (8)

4 (2)

4 (4)

4 (5, 6)

4 (5)

(NOT USED)

51348t1.tbl

KEY:

(1) With 685-8 Line Card with Rev. 4.4d software.

(2) With 9002 Line Card Rev. 9035 software or 9032 Line Card with 9326A software.

(3) Rev. 4.0 software.

(4) FBI CP220FB Rec-11 Line Card with Rev. 2.6 software and a memory card with

Rev. 3.8 software.

(5) Model 6500 with Rev. 600 software.

(6) Model 6000 with Rev. 204 software.

(7) With Rev. B control card at Rev. 1.4 software and Rev. C line card at Rev. 1.5 software.

(8) Model 2 only.

(9) Version 1.62 software.

Flex 405 CS-2405 09/01/06

Page 3 of 4

Notes

Gamewell-FCI

12 Clintonville Road

Northford, CT 06472-1610

Phone: 203-484-7161

Fax: 203-484-7118

Specifications and wiring information are provided for information only and are

believed to be accurate. Gamewell-FCI assumes no responsibility for their use.

Data and design are subject to change without notice. Installation and wiring

instructions shipped with the product shall always be used for actual installation. For

more information, contact Gamewell-FCI.

www.gamewell-fci.com

A Honeywell Company

Flex 405 CS-2405 09/01/06

Page 4 of 4

型号:	5222132-1
Brand Name：	AMP
是否无铅：	不含铅
是否Rohs认证：	符合
生命周期：	Active
Reach Compliance Code：	not_compliant
ECCN代码：	EAR99
HTS代码：	8536.69.40.10
风险等级：	0.77
主体宽度：	0.625 inch
主体深度：	1.4 inch
主体长度：	0.581 inch
主体/外壳类型：	JACK
特性阻抗：	75 Ω
连接器类型：	RF BNC CONNECTOR
联系完成配合：	GOLD (30)
触点性别：	FEMALE
触点材料：	NOT SPECIFIED
触点样式：	COAX
耦合类型：	BAYONET
DIN 符合性：	NO
滤波功能：	NO
IEC 符合性：	NO
绝缘体材料：	POLYMETHYLPENTENE
MIL 符合性：	NO
安装选项1：	LOCKING
安装方式：	STRAIGHT
安装类型：	BOARD
端口数量：	1
选件：	GENERAL PURPOSE
面板安装：	YES
可靠性：	COMMERCIAL
外壳面层：	NICKEL
外壳材料：	ZINC
子类别：	RF BNC Connectors
端子长度：	0.21 inch
端接类型：	SOLDER
触点总数：	1
Base Number Matches：	1

电子百科

产品导航

产品型号52223的Datasheet PDF文件预览

5222132-1相关产品

5222132-1相关文章

IC37:专业IC行业平台