欢迎访问ic37.com |
会员登录 免费注册
发布采购

AD7755AARS 参数 Datasheet PDF下载

AD7755AARS图片预览
型号: AD7755AARS
PDF下载: 下载PDF文件 查看货源
内容描述: 电能计量IC,具有脉冲输出 [Energy Metering IC with Pulse Output]
分类和应用: 脉冲
文件页数/大小: 16 页 / 251 K
品牌: AD [ ANALOG DEVICES ]
 浏览型号AD7755AARS的Datasheet PDF文件第2页浏览型号AD7755AARS的Datasheet PDF文件第3页浏览型号AD7755AARS的Datasheet PDF文件第4页浏览型号AD7755AARS的Datasheet PDF文件第5页浏览型号AD7755AARS的Datasheet PDF文件第6页浏览型号AD7755AARS的Datasheet PDF文件第7页浏览型号AD7755AARS的Datasheet PDF文件第8页浏览型号AD7755AARS的Datasheet PDF文件第9页  
a
FEATURES
High Accuracy, Supports 50 Hz/60 Hz IEC 687/1036
Less than 0.1% Error Over a Dynamic Range of
500 to 1
The AD7755 Supplies
Average Real Power
on the
Frequency Outputs F1 and F2
The High Frequency Output CF Is Intended for
Calibration and Supplies
Instantaneous Real Power
The Logic Output REVP Can Be Used to Indicate a
Potential Miswiring or Negative Power
Direct Drive for Electromechanical Counters and
Two Phase Stepper Motors (F1 and F2)
A PGA in the Current Channel Allows the Use of Small
Values of
Shunt
and
Burden
Resistance
Proprietary ADCs and DSP Provide High Accuracy over
Large Variations in Environmental Conditions and
Time
On-Chip Power Supply Monitoring
On-Chip Creep Protection (No Load Threshold)
On-Chip Reference 2.5 V 6 8% (30 ppm/8C Typical)
with External Overdrive Capability
Single 5 V Supply, Low Power (15 mW Typical)
Low Cost CMOS Process
Energy Metering IC
with Pulse Output
AD7755*
GENERAL DESCRIPTION
The AD7755 is a high accuracy electrical energy measurement
IC. The part specifications surpass the accuracy requirements
as quoted in the IEC1036 standard. See Analog Devices’
Application Note AN-559 for a description of an IEC1036
watt-hour meter reference design.
The only analog circuitry used in the AD7755 is in the ADCs
and reference circuit. All other signal processing (e.g., multipli-
cation and filtering) is carried out in the digital domain. This
approach provides superior stability and accuracy over extremes
in environmental conditions and over time.
The AD7755 supplies average real power information on the
low frequency outputs F1 and F2. These logic outputs may be
used to directly drive an electromechanical counter or interface
to an MCU. The CF logic output gives instantaneous real power
information. This output is intended to be used for calibration
purposes, or interfacing to an MCU.
The AD7755 includes a power supply monitoring circuit on the
AV
DD
supply pin. The AD7755 will remain in a reset condition
until the supply voltage on AV
DD
reaches 4 V. If the supply falls
below 4 V, the AD7755 will also be reset and no pulses will be
issued on F1, F2 and CF.
Internal phase matching circuitry ensures that the voltage and
current channels are phase matched whether the HPF in Chan-
nel 1 is on or off. An internal no-load threshold ensures that the
AD7755 does not exhibit any creep when there is no load.
The AD7755 is available in 24-lead DIP and SSOP packages.
FUNCTIONAL BLOCK DIAGRAM
G0 G1
AV
DD
AGND
AC/DC
DV
DD
DGND
AD7755
POWER
SUPPLY MONITOR
V1P
V1N
PGA
x1, x2, x8, x16
PHASE
CORRECTION
ADC
...
110101
...
SIGNAL
PROCESSING
BLOCK
HPF
LPF
MULTIPLIER
V2P
V2N
4k
2.5V
REFERENCE
DIGITAL-TO-FREQUENCY
CONVERTER
RESET
ADC
...
11011001
...
REF
IN/OUT
CLKIN CLKOUT SCF S0
S1 REVP CF
F1
F2
*U.S.
Patents 5,745,323, 5,760,617, 5,862,069, 5,872,469.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
World Wide Web Site: http://www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2000