HDMP-1022 (Tx)
Thermal Characteristics, TA = 25°C, VCC = 5 V
Symbol
Parameter
Units
Typ.
Θja
Thermal Resistance, Junction to Air. Measured in still air with the package
mounted on a thermal test PCB per JEDEC standard JC -15.1
°C/Watt
24
Θjc
Thermal Resistance, Junction to Case. Top center of the package is used as
the reference point
°C/Watt
4
PD
Power Dissipation, VCC = 5 Volts
Watt
1.9
HDMP-1024 (Rx)
Thermal Characteristics, TA = 25°C, VCC = 5 V
Symbol
Parameter
Units
Typ.
Θja
Thermal Resistance, Junction to Air. Measured in still air with the package
mounted on a thermal test PCB per JEDEC standard JC -15.1
°C/Watt
24
Θjc
Thermal Resistance, Junction to Case. Top center of the package is used as
the reference point
°C/Watt
4
PD
Power Dissipation, VCC = 5 Volts
Watt
2.5
I/O Type Definitions
I/O Type
Definition
I-TTL
O-TTL
O-BLL
Input TTL. Floats high when left open.
Output TTL.
50 Ω matched output driver. Will drive AC coupled 50 Ω loads, with 150 Ω pull-up resistors
for broad band matching. All unused outputs should have 150 Ω pull-up resistors, and AC
coupled to a 50 Ω resistor to ground.
I-H50
Input with internal 50 Ω terminations. Input is diode level shifted so that it can swing around
power. Can be driven with single-end configuration. Commonly used with input single-end AC
coupling from an O-BLL driver or another 50 Ω source, or differential direct coupling from
an O-BLL driver.
C
S
Filter capacitor node.
Power supply or ground.
628