e5130
Low Voltage CMOS Driver Circuit
Description
The e5130 contains 4 independent driver outputs with an
ON resistance of typ. 25
W
(15
W)
tor the P-channel
output transistors and typ. 20
W
(13
W)
for the N-channel
output transistors; at a supply voltage of 1.5 V (3 V). To
obtain a fast transition of the outputs, even for slow
rise/-fall time input signals, all digital inputs (IN1 ... IN4)
have a schmitt-trigger characteristic; with a hysteresis of
typ. 50 mV. If a higher driving capability is needed, all
inputs and outputs may be connected in parallel. In this
case the rise/-fall time of the input signals IN1 ... IN4 must
be less than 200 nsec. Due to the fast switching
characteristic of the tristatable output drivers, the circuit
is also suited as low voltage bus driver.
Features
D
1.1 – 3.6 V operating voltage range
D
4 non-inverting, tristatable drivers for the
following applications:
– Motor driver for bipolar stepper motors in watch/-
clock applications
– Driver for piezoelectric transducers (buzzer)
– LED Driver
– Line driver for medium speed applications
Advantages
D
High load current at low supply voltage
D
Replaces several discrete transistors
D
Tri-state operation possible
D
Possible applications:
– Motor driver
– Radio controlled clock/watch
– Line driver for mini-computer, laptop
– LED driver
– Relay driver
Pad Configuration
OUT1 OUT2 OUT3 OUT4
V
DD
V
SS
V
DD
IN1 ... IN4
TRI
Name
Description
Positive supply voltage
Negative supply voltage
Digital inputs
Tristate input
Drive outputs
e5130
TRI
94 8178
OUT1 ... OUT4
Chipsize: x = 1.08 mm, y = 1.42 mm,
Padwindow: 90 x 90
m
IN1
IN2
IN3
IN4
V
SS
Ordering Information
Extended Type Number
e5130A–DIT
Die
Package
Die in Trays
Remarks
Rev. A2, 13-Mar-01
1 (4)
ATMEL [ ATMEL CORPORATION ]
