Recommended Pb-free IR Profile
t
p
T
p
T
L
TEMPERATURE
T
smax
T
smin
t
s
PREHEAT
60 to 180 SEC.
25
t
L
60 to 150 SEC.
* 260 +0/-5
°C
217
°C
150 - 200
°C
RAMP-UP
3
°C/SEC.
MAX.
RAMP-DOWN
6
°C/SEC.
MAX.
TIME WITHIN 5
°C
of ACTUAL
PEAK TEMPERATURE
15 SEC.
NOTES:
THE TIME FROM 25
°C
to PEAK
TEMPERATURE = 8 MINUTES MAX.
T
smax
= 200
°C,
T
smin
= 150
°C
NOTE: NON-HALIDE FLUX SHOULD BE USED.
* RECOMMENDED PEAK TEMPERATURE FOR
WIDEBODY 400mils PACKAGE IS 245
°C
t 25
°C
to PEAK
TIME
Regulatory Information
The 6N137, HCPL-26XX/06XX/46XX, and HCNW137/26XX have been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice
#5, File CA 88324.
Insulation and Safety Related Specifications
8-pin DIP
(300 Mil)
Value
7.1
IEC/EN/DIN EN 60747-5-2
Approved under
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
(Option 060 and HCNW only)
Parameter
Minimum External
Air Gap (External
Clearance)
Minimum External
Tracking (External
Creepage)
Minimum Internal
Plastic Gap
(Internal Clearance)
Symbol
L(101)
SO-8
Value
4.9
Widebody
(400 Mil)
Value
9.6
Units
mm
Conditions
Measured from input terminals
to output terminals, shortest
distance through air.
Measured from input terminals
to output terminals, shortest
distance path along body.
Through insulation distance,
conductor to conductor, usually
the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Measured from input terminals
to output terminals, along
internal cavity.
DIN IEC 112/VDE 0303 Part 1
L(102)
7.4
4.8
10.0
mm
0.08
0.08
1.0
mm
Minimum Internal
Tracking (Internal
Creepage)
Tracking Resistance
(Comparative
Tracking Index)
Isolation Group
CTI
NA
NA
4.0
mm
200
200
200
Volts
IIIa
IIIa
IIIa
Material Group
(DIN VDE 0110, 1/89, Table 1)
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
8
AVAGO [ AVAGO TECHNOLOGIES LIMITED ]
