CHINA
SEMICONDUCTOR
CORPORATION
Model No:CSLR-N508SW4-B0
:
■
Precautions For Use -
1. Recommended Soldering conditions
Wave Soldering
Spec. No.
Rev.
PS-LL-N508SW4-B0
A
260(max.)
250
240
Preheat
105(max.)
Temperature(°C)
0
Max. 60sec.
Time(sec.)
5 sec.
2. Soldering Iron
Basic SPEC. is
≦5sec.
When 260℃. If temperature is higher, time should
be shorter (+10℃→ -1sec.). Power dissipation of iron should be smaller than 15W
, and temperature should be controllable. Surface temperature of the device should
be under 230℃.
3. Static Electricity
a. Static electricity or surge voltage damages LEDs..
It is recommended that a wrist band or an anit-electrostatic glove be used
when handling the LEDs.
b. All devices, equipment and machinery must be properly grounded. It is
recommended that mesures be taken against surge voltage to the equipment
that mounts the LEDs.
Note: The specifications are subject to change without notice. Please contact us for updated information.
http://www.csctw.com.tw
Page:
5/5