4.0 Serial Interface
CN8478/CN8474A/CN8472A/CN8471A
4.5 Channelized Port Mode
Multichannel Synchronous Communications Controller (MUSYCC™)
Figure 4-3. Transmit and Receive E1 (also 2xE1, 4xE1) Mode
RCLK
RSYNC-RISE(a)
6
7
0
1
2
3
4
5
6
7
0
1
RDATA-RISE(a)
RSYNC-RISE(b)
RDAT-FALL(b)
6
7
0
1
2
3
4
5
6
7
0
1
RSYNC-FALL(c)
RDATA-RISE(c)
6
7
0
1
2
3
4
5
6
7
0
1
RSYNC-FALL(d)
RDAT-FALL(d)
6
7
0
1
2
3
4
5
6
7
0
1
TCLK
TSYNC-RISE(a)
TDAT-RISE(a)
6
7
0
1
2
3
4
5
6
7
0
1
TSYNC-RISE(b)
TDATA-FALL(b)
6
7
0
1
2
3
4
5
6
7
0
1
TSYNC-FALL(c)
TDAT-RISE(c)
6
7
0
1
2
3
4
5
6
7
0
1
TSYNC-FALL(d)
TDATA-FALL(d)
6
7
0
1
2
3
4
5
6
7
0
1
8478_015
NOTE(S):
1. E1 Mode employs 32 time slots (0–31) with 8 bits per time slot (0–7) and 256 bits per frame and one frame every
125 µs—2.048 MHz.
2. 2xE1 mode employs 64 time slots (0–63) with 8 bits per time slot (0–7) and 512 bits per frame and one frame every
125 µs—4.096 MHz.
3. 4xE1 mode employs 128 time slots (0–127) with 8 bits per time slot (0–7) and 1024 bits per frame and one frame every
125 µs—8.192 MHz.
4. RSYNC and TSYNC must be asserted for a minimum of 1 CLK period.
5. MUSYCC can be configured to sample RSYNC, TSYNC, RDAT, and TDAT on either a rising or falling clock edge
independent of any other signal sampling configuration.
6. Relationships between the various configurations of active edges for the synchronization signal and the data signal are
shown using a common clock signal for receive and transmit operations. Note the relationship between the frame bit
(within RDAT, TDAT) and the frame synchronization signal (e.g., RSYNC, TSYNC).
7. All received signals (e.g., RSYNC, RDAT, TSYNC) are sampled on the specified clock edge (e.g., RCLK, TCLK). All transmit
data signals (TDAT) are latched on the specified clock edge.
8. In configuration (a), synchronization and data signals are sampled or latched on a rising clock edge.
9. In configuration (b), synchronization signal is sampled on a rising clock edge, and the data signal is sampled or latched on
a falling clock edge.
10. In configuration (c), synchronization signal is sampled on a falling clock edge, and the data signal is sampled or latched on
a rising clock edge.
11. In configuration (d), synchronization and data signals are sampled or latched on a falling clock edge.
4-6
Conexant
100660E
CONEXANT [ CONEXANT SYSTEMS, INC ]
