EL4390C
Triple 80 MHz Video Amplifier with DC Restore
Features
b
General Description
The EL4390C is three wideband current-mode feedback amplifi-
ers optimized for video performance, each with a DC restore
amplifier. The DC restore function is activated by a common
TTL/CMOS compatible control signal while each channel has a
separate restore reference.
# 80 MHz 3 dB bandwidth for
gains of 1 to 10
# 800 V/ms slew rate
# 15 MHz bandwidth flat to 0.1 dB
# Excellent differential gain and
phase
Each amplifier can drive a load of 150X at video signal levels.
# TTL/CMOS compatible DC
restore function
g
g
The EL4390C operates on supplies as low as 4V up to 15V.
Being a current-mode feedback design, the bandwidth stays rel-
# Available in 16 lead P-DIP, 16
lead SOL
g
g
atively constant at approximately 80MHz over the 1 to 10
gain range. The EL4390C has been optimized for use with
1300X feedback resistors.
Applications
# RGB drivers requiring DC
restoration
Connection Diagram
# RGB multiplexers requiring DC
restoration
# RGB building blocks
# Video gain blocks requiring DC
restoration
# Sync and color burst processing
Ordering Information
Package Outline
Ý
Part No. Temp. Range
b
b
a
40 C to 85 C 16-Pin P-DIP MDP0031
EL4390CN
EL4390CM
§
§
40 C to 85 C 16-Lead SOL MDP0027
a
§
§
4390–1
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a ‘‘controlled document’’. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
©
1994 Elantec, Inc.