EL5192C Preliminary
600MHz Current Feedback Amplifier
Features
General Description
• 600 MHz -3dB bandwidth
• 6mA supply current
• Single and dual supply operation,
The EL5192C is a current feedback amplifier with a very high band-
width of 600MHz. This makes this amplifier ideal for today’s high
speed video and monitor applications.
from 5V to 10V
• Fast enable, just 25ns (selected
packages only)
• Available in SOT23-5 and SPT23-
6 packages
• Dual (EL5292C) and triples
(EL5392C) available
• Fixed gain version also available
With a supply current of just 6mA and the ability to run from a single
supply voltage from 5V to 10V, the EL5192C is also ideal for hand
held, portable or battery powered equipment.
The amplifier is also available with a fast acting disable. This disable
will turn off in 10ns, and enable again in just 25ns, making the
EL5192C amplifier ideal for multiplexing applications. Allowing the
CE pin to float, or applying a low logic level will enable the amplifier.
for gains of +1, -1, +2 (EL5196C)
• High speed, 1GHz product
available (EL5191C)
• Low power, 4mA, 300MHz
product available (EL5193C
family, EL5197C family with fixed
gain)
For applications where board space is critical, the EL5192C is offered
in both the SOT23-5 and SOT23-6 packages, as well as an industry
standard 8-pin SOIC. The EL5192C operates over the industrial tem-
perature range of -40°C to +85°C.
Pin Configurations
Applications
• Video Amplifier
• Cable Drivers
• RGB Amplifier
SOT23-5
OUT
1
2
3
5
4
V +
S
• Test Equipment
• Instrumentation
• Current to Voltage Converters
V -
S
8-Pin SOIC
IN+
IN-
NC
IN-
CE
1
2
3
4
8
7
6
5
EL5192CW5
SOT23-6
V +
S
-
+
IN+
OUT
NC
V -
S
OUT
1
2
3
6
5
4
V +
S
Ordering Information
EL5192CS
Tape &
V -
S
CE
IN-
Part No
Package
SOT23-5
Reel
Outline #
MDP0038
MDP0038
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
EL5192CW5-T7
EL5192CW5-T13
EL5192CW6-T7
EL5192CW6-T13
EL5192CS
7”
IN+
SOT23-5
13”
7”
SOT23-6
EL5192CW6
SOT23-6
13”
-
8-Pin SOIC
8-Pin SOIC
8-Pin SOIC
EL5192CS-T7
EL5192CS-T13
7”
13”
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 1995 Elantec, Inc.
ELANTEC [ ELANTEC SEMICONDUCTOR ]
