EL5396C - Preliminary
Triple 400MHz Fixed Gain Amplifier
Features
General Description
• Gain selectable (+1, -1, +2)
• 400MHz -3dB Bandwidth (AV = 1,
2)
• 9mA supply current (per amplifier)
• Single and dual supply operation,
from 5V to 10V
The EL5396C is a triple channel, fixed gain amplifier with a band-
width of 400MHz, making these amplifiers ideal for today’s high
speed video and monitor applications. The EL5396C features internal
gain setting resistors and can be configured in a gain of +1, -1 or +2.
The same bandwidth is seen in both gain-of-1 and gain-of-2
applications.
• Power-down
• Available in 16-pin QSOP package
• Single (EL5196C) available
• 200MHz, 3mA product available
(EL5197C, EL5397C)
The EL5396C can be run from a single or dual supply voltage of 5V to
10V and consumes just 9mA of supply current per channel. Each
channel of the EL5396C has a disable. Upon being disabled, the out-
puts are tri-stated and the power supply current reduces to less than
150µA per amplifier. Allowing the CE pin to float, or applying a low
logic level will enable the amplifier.
Applications
For applications where board space is critical, the EL5396C is offered
in the 16-pin QSOP package, as well as a 16-pin SO. The EL5396C is
specified for operation over the full industrial temperature range of ---
-40°C to +85°C.
• Video Amplifiers
• Cable Drivers
• RGB Amplifiers
• Test Equipment
• Instrumentation
• Current to Voltage Converters
Pin Configurations
Ordering Information
Tape &
16-Pin SO & QSOP
Part No
EL5396CS
Package
16-Pin SO
Reel
Outline #
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
-
INA+
CEA
VS-
1
2
3
4
5
6
7
8
16 INA-
15 OUTA
14 VS+
13 OUTB
12 INB-
11 NC
EL5396CS-T7
EL5396CS-T13
EL5396CU
16-Pin SO
7”
16-Pin SO
13”
-
-
16-Pin QSOP
16-Pin QSOP
+
EL5396CU-T13
13”
+
-
CEB
INB+
NC
+
-
CEC
INC+
10 OUTC
9
INC-
EL5396CS, EL5396CU
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.