EL5485C, EL5486C - Preliminary
Quad 4ns High Speed Comparators
Features
General Description
• 4ns typ. propagation delay
• 5V to 12V input supply
• +2.7V to +5V output supply
• True-to-ground input
The EL5485C and EL5486C comparators are designed for operation
in single supply and dual supply applications with 5V to 12V between
VS+ and VS-. For single supplies, the inputs can operate from 0.1V
below ground for use in ground sensing applications.
• Rail-to-rail outputs
• Separate analog and digital
supplies
The output side of the comparators can be supplied from a single sup-
ply of 2.7V to 5V. The rail-to-rail output swing enables direct
connection of the comparator to both CMOS and TTL logic circuits.
• Active low latch
The latch input of the EL5485C and EL5486C can be used to hold the
comparator output value by applying a low logic level to the pin.
• Single (EL5185C) available
• Dual (EL5285C) available
• Window available (EL5287C)
• Pin-compatible 8ns family
available (EL5x81C, EL5283C &
EL5482C)
The EL5485C is available in the 16-pin SO package and the EL5486C
in the 24-pin QSOP package. Both are specified for operation over the
full -40°C to +85°C temperature range. Also available are single
(EL5185C), dual (EL5285C), and window comparator (EL5287C)
versions.
Applications
Pin Configurations
• Threshold detection
• High speed sampling circuits
• High speed triggers
• Line receivers
INA-
INA+
1
2
3
4
5
6
7
8
9
24 IND-
23 IND+
22 NC
• PWM circuits
• High speed V/F converters
NC
+
-
-
+
GND
21 VS+
Ordering Information
INA-
INA+
GND
OUTA
OUTB
VS-
1
2
3
4
5
6
7
8
16 IND-
15 IND+
14 VS+
LATCHA
OUTA
OUTB
LATCHB
VS-
20 LATCHD
19 OUTD
18 OUTC
17 LATCHC
16 VSD
15 NC
Part No
Package
Tape & Reel
Outline #
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
EL5485CS
16-Pin SO
-
EL5485CS-T7
EL5485CS-T13
EL5486CU
16-Pin SO
7”
13”
-
+
-
-
+
16-Pin SO
24-Pin QSOP
24-Pin QSOP
EL5486CU-T13
13”
13 OUTD
12 OUTC
11 VSD
10 INC+
+
-
-
+
NC 10
INB+ 11
INB- 12
+
-
-
+
INB+
INB-
14 INC+
13 INC-
9
INC-
EL5485CS
(16-Pin SO)
EL5486CU
(24-Pin QSOP)
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.
ELANTEC [ ELANTEC SEMICONDUCTOR ]
