EN5339QI
3A Low Profile Synchronous Buck DC-DC
Converter with Integrated Inductor
RoHS Compliant
Halogen Free
Description
The EN5339QI is a highly integrated, low profile,
highly efficient, 3A synchronous buck power system
on a chip (PowerSoC). The device features an
advance integrated inductor, integrated MOSFETs, a
PWM voltage-mode
controller,
and
internal
compensation providing the smallest possible solution
size.
The EN5339QI PowerSoC is designed specifically to
meet the driving demand for higher power density by
providing a fully integrated buck converter into a tiny
4x6x1.1mm 24-pin QFN package. It features high
efficiency, excellent line and load regulation and
guarantees the full 3A output current over
temperature.
The EN5339QI operates at high switching frequency
and allows for the use of tiny MLCC capacitors. It also
enables a very wide control loop bandwidth providing
excellent transient performance and reduced output
impedance. The internal compensation is designed
for unconditional stability across all operating
conditions.
The Enpirion integrated inductor solution significantly
helps to reduce noise. The complete power converter
solution enhances productivity by offering greatly
simplified board design, layout and manufacturing
requirements. All Enpirion products are RoHS
compliant and lead-free manufacturing environment
compatible.
Features
•
Integrated Inductor
•
Solution Footprint as Small as 55 mm
2
•
Low Profile, 1.1mm
•
High Reliability Solution: 35,700 Years MTBF
•
High Efficiency, up to 95 %
•
Low Output Ripple Voltage; <5mV
P-P
Typical
•
±3% Output Variation Over Line, Load, Temp
•
2.4 V to 5.5 V Input Voltage Range
•
3A Continuous Output Current Capability
•
Output Enable and Power OK Signal
•
Under Voltage Lockout, Over Current, Short Circuit,
and Thermal Protection
•
RoHS Compliant; Halogen Free; 260° Reflow
C
Applications
•
Applications with Low Profile Requirement such as
SSD and Embedded Computing
•
SAN/NAS Accelerator Appliance
•
Controllers, Raid, Processors, Network Processors,
DSPs’ FPGAs, and ASICs
•
Noise Sensitive Applications
Efficiency vs. Output Current
100
90
EFFICIENCY (%)
80
70
60
50
40
30
20
10
0
0
0.5
1
1.5
2
OUTPUT CURRENT (A)
2.5
3
CONDITIONS
VIN = 3.3V
VOUT = 2.5V
VOUT = 1.2V
Actual Solution Size
55mm
2
Figure 1.
Simplified Applications Circuit
Figure 2.
Highest Efficiency in Smallest Solution Size
www.enpirion.com
06903
September 12, 2012
Rev:
B
ENPIRION [ ENPIRION, INC. ]
