欢迎访问ic37.com |
会员登录 免费注册
发布采购

EQCO-SDI30-7501 参数 Datasheet PDF下载

EQCO-SDI30-7501图片预览
型号: EQCO-SDI30-7501
PDF下载: 下载PDF文件 查看货源
内容描述: EqcoLogic HD- SDI中继器的远距离数字HD- CCTV [EqcoLogic HD-SDI Repeaters for long-haul digital HD-CCTV]
分类和应用: 电视中继器
文件页数/大小: 2 页 / 543 K
品牌: EQCOLOGIC [ EqcoLogic ]
 浏览型号EQCO-SDI30-7501的Datasheet PDF文件第2页  
Open your Eyes™
EqcoLogic HD-SDI Repeaters for long-haul digital HD-CCTV
Extend HD-CCTV links up to 1.0km
with power over cable and camera
control link over single coax cable
EqcoLogic’s EQCO-SDI30-7501 is an extender solution
for HD-SDI links, operating with 75Ω coax cable.
Each unit receives a HD-CCTV signal that may be
attenuated by up to 220m of coax cable.
Implementation
Each repeater supports a date-rate of 2.97 Gbit/s (3G-
SDI). A link of up to 220m can be achieved with a data
-rate of 1.485 Gbit/s (depending on cable quality*).
Longer lengths can be supported with lower speed
cameras: for example, 720m for SDI cameras.
Up to 5 repeater units can be daisy-chained together,
all powered over the coax cable by power injected to
the first repeater.
DVR side Repeater including Link Power and Control Channel
The repeater contains three critical components to
correct and then retransmit the signal:
Adaptive Equalizer to return the signal to its original
amplitude and modulation
Reclocker to resynchronize the signal—bringing it
back to its original condition
Cable Driver to retransmit the signal with its original
characteristics restored
In-line HDSDI Repeater
Furthermore, the repeater design allows for two
unique benefits:
Power can be transmitted from the recorder (DVR)
side to the camera over the coax cable.
Up to 6 repeaters may be powered from the coax
cable; if only one or two repeaters are used, the
power may also be adequate to power the SDI
camera.
A control signal (RS485) can be transmitted from the
recorder (DVR) side to the camera over the
coax
Camera side HDSDI Repeater with Power and Control
cable
Repeater enables simultaneous signal transmission,
camera control and power over a single cable.
The camera control is via RS485, the most commonly
used protocol and a control signal bandwidth of up to
38.4 kbps is supported.
*Subject to maximum cable attenuation, see over for details
SL-EQC0-HD-CCTV Repeater-0v1 ©2011
Camera control signals and the system power can be
injected at the first repeater (nearest the recorder).
Control signals and camera power (if appropriate) can
similarly be taken from the repeater nearest to the
camera and fed into the camera itself.