Mechanical Data
Through-hole version
Surface-mount version
Foot print Component side
Foot print Component side
• • • • • • • • •
18 17 16 15 14 13 12 11 10
•
•
• • • • • • • •
40.0 [1.575]
∅
×
1
2
3
4
5
6
7
8
9
5.0 [0.197]
40.0 [1.575]
3.6 [0.142]
24.0 [0.945]
29.6 [1.165]
2.8 [0.110]
Dimensions in mm (in)
Dimensions in mm (in)
Connections
Pin
1
2
3–6
7
8
9
10
11
12–16
17
18
Designation
Out 1
Rtn
NC
Sync
V
adj
NOR
TOA
RC
NC
+In
– In
Function
Output 1. Positive voltage ref. to Rtn.
Output return.
Not connected.
Synchronization input.
Output voltage adjust. To set typical output voltage (V
Oi
)
connect pin 8 to pin 9.
Connection of Nominal Output voltage Resistor. (See Operating
Information, Output Voltage Adjust).
Turn-on/off input voltage adjust (V
Ion
/V
Ioff
). Used to decrease the
turn-on/off input voltage threshold.
Remote control and turn-on/off input voltage adjust. Used to turn-on
and turn-off output and to set the turn-on/off input voltage threshold.
Not connected.
Positive input.
Negative input.
Weight
Maximum 20 g (0.71 oz).
Case
The case consists of semiconductor grade
epoxy with embedded pins.
Coefficient of thermal expansion (CTE) is
typ. 15 ppm/°C.
Connection Pins
Base material is copper (Cu), first plating
is nickel (Ni) and second (outer) plating is
palladium (Pd).
3
EN/LZT 146 31 R1A (Replaces EN/LZT 137 21 R6) © Ericsson Microelectronics AB, June 2000