EURO
QUARTZ
7 x 5mm SMD HCMOS
FEATURES
Miniature 7.0 x 5.0 x 1.4mm, hermetically-sealed package
Frequency Range 312.5kHz to 125MHz
Tristate (Enable/Disable) function as standard
Supply voltage range 1.8, 2.5, 3.3 or 5.0 Volts
High ouput load version (50pF) available
XO91 Oscillators
312.5kHz to 125MHz
Page
1 of 2
OUTLINE & DIMENSIONS
DESCRIPTION
XO91 oscillators consist of a TTL/CMOS-compatible hybrid circuit
together with a miniature quartz crystal packaged in a low-profile,
industry-standard ceramic package. The high quality design and
materials employed provide a highly reliable clock oscillator in a
miniature package while mass production methods ensure that the
XO91 provides a cost-effective oscillator solution.
SPECIFICATION
Frequency Range:
Supply Voltage:
Output Logic:
Frequency Stability*
0° to +50°C:
-20° to +70°C:
-40 to +85°C:
-55° to +105°C:
Rise/Fall Time:
Output Voltage:
HIGH ‘1’:
LOW ‘0’:
Output Load:
Duty Cycle:
Supply Current:
Rise/Fall Times:
Operating Temperature
312.5kHz to 125.0MHz
1.8, 2.5, 3.3 Volts±5%
or 5.0 Volts ±10%
HCMOS/LSTTL
from ±10ppm
from ±15ppm
from ±25ppm
from ±100ppm
see table
90%Vdd minimum
10%Vdd maximum
15pF (30pF and 50pF available for
supply voltages 3.3 and 5.0 Volts)
50%±5% typical
See table
See table
0~70°C (Commercial)
-40~+85 (Industrial)
-55~+105°C (Military)
Startup Time
312.5kHz to 32MHz:
32MHz+ to 125MHz:
5ms max.
10ms max.
(to reach 90% amplitude at 25±2°C)
±5ppm max. In first year
<1ps typical
100ms max.
100ns max.
CURRENT CONSUMPTION & RISE/FALL TIME*
Frequency Range
0.3MHz to 1.5MHz
1.0MHz to 1.5MHz
1.5MHz+ to 20MHz
20MHz+ to 50MHz
50MHz+ to 60MHz
50MHz+ to 125MHz
Rise/Fall Time
*Maximum values stated
Supply Voltage
+1.8V
5mA
8mA
15mA
22mA
5ns
+2.5V +3.3V +5.0V
5mA
8mA
15mA
25mA
7ns
5mA
8mA
15mA
35mA
10ns
5mA
10mA
25mA
40mA
10ns
Ageing:
Phase Jitter RMS:
Enable Time:
Disable Time:
Tristate Function (Pad 1):
Output (Pad 3) is active if Pad 1 is not connected or a
voltage to Pad 1 is 'HIGH'. Output is high impedance
when 'LOW' or GROUND is applied to Pad 1.
* Frequency stability is inclusive of calibration tolerance at 25°C,
frequency change due to shock & vibration, ±10 supply voltage
variation and stability over temperature range.
Note: Parameters are measured at ambient temperature of 25°C,
supply voltage as stated and a load of 15pF
SOLDER TEMPERATURE PROFILE
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk
EUROQUARTZ [ EUROQUARTZ LIMITED ]
