欢迎访问ic37.com |
会员登录 免费注册
发布采购

FAN5078MPX 参数 Datasheet PDF下载

FAN5078MPX图片预览
型号: FAN5078MPX
PDF下载: 下载PDF文件 查看货源
内容描述: DDR / ACPI调节器组合 [DDR/ACPI Regulator Combo]
分类和应用: 调节器双倍数据速率
文件页数/大小: 16 页 / 338 K
品牌: FAIRCHILD [ FAIRCHILD SEMICONDUCTOR ]
 浏览型号FAN5078MPX的Datasheet PDF文件第2页浏览型号FAN5078MPX的Datasheet PDF文件第3页浏览型号FAN5078MPX的Datasheet PDF文件第4页浏览型号FAN5078MPX的Datasheet PDF文件第5页浏览型号FAN5078MPX的Datasheet PDF文件第6页浏览型号FAN5078MPX的Datasheet PDF文件第7页浏览型号FAN5078MPX的Datasheet PDF文件第8页浏览型号FAN5078MPX的Datasheet PDF文件第9页  
FAN5078 DDR/ACPI Regulator Combo
May 2006
FAN5078
DDR/ACPI Regulator Combo
Features
PWM regulator for VDDQ (2.5V or 1.8)
Linear LDO regulator generates VTT = VDDQ/2,
1.5A Peak sink/source capability
AMT / M-state support
Control to generate 5V USB
ACPI drive and control for 5V DUAL generation
3.3V internal LDO for 3V-ALW generation
300 kHz fixed frequency switching
R
DS(ON)
current sensing or optional current sense resistor
for precision over-current detect
Internal synchronous boot diode
Common Power Good signal for all voltages
Input under-voltage lockout (UVLO)
Thermal shutdown
Latched multi-fault protection
Precision reference output for ULDO controllers
24-pin 5 x 5 MLP package
Description
The FAN5078 DDR memory regulator combines a high-
efficiency Pulse-Width Modulated (PWM) controller to
generate the memory supply voltage, VDDQ, and a linear
regulator to generate termination voltage (VTT).
Synchronous rectification provides high efficiency over a wide
range of load currents. Efficiency is further enhanced by using
the low-side MOSFET’s R
DS(ON)
to sense current.
The VDDQ PWM regulator is a sampled current mode control
with external compensation to achieve fast load-transient
response and provide system design optimization.
The VTT regulator derives its reference and takes its power
from the VDDQ PWM regulator, output. The VTT termination
regulator is capable of sourcing or sinking 1.5A peak currents.
In S5 M1 mode, the VDDQ switcher, VTT regulator, and the
3.3V regulators remain on. S3 mode keeps these regulators
on, but also turns on an external P-Channel to provide 5V
USB.
A single soft-start capacitor enables controlled slew rates for
both VDDQ and 3.3V-ALW outputs.
PGOOD becomes true in S0 only after all regulators have
achieved stable outputs.
In S5 (EN = 0), the 3.3V internal LDO stays on while the other
regulators are powered down.
Applications
DDR VDDQ and VTT voltage generation with ACPI
support
Desktop PC's
Servers
Ordering Information
Part Number
FAN5078MPX
Temperature Range
-10°C to 85°C
Package
MLP-24 5x5mm
Packing
Tape and Reel
© 2006 Fairchild Semiconductor Corporation
FAN5078 Rev. 1.0.0 • 05/09/06
www.fairchildsemi.com