DM200-01-3/4 CML
TM
Butterfly Transmitter Product Specification – May 2007
Finisar
Electro-Static Discharge (ESD)
The device meets the ESD Class 3 requirements of the Telcordia standard TR-NWT-
000870 Issue 1, dated February 1991.
IX. Order Information
Product code
For the product specified in this document, the proper product code shall be:
DM200-01-3 (or -4) -xxxx-0-LC-yyyy
This product code should be specified when placing a purchase order.
•
•
“01” indicates a butterfly box module as specified in this document.
“3” indicates the laser wavelength can be tuned over a sub-band to cover 8 ITU-T
channels with 50GHz spacing; -“4” indicates the laser wavelength can be tuned
over a sub-band to cover 4 ITU-T channels with 100GHz spacing.
“xxxx” is the channel ID as specified in Table 9 and Table 10. For 4 X 100GHz
option (-(-“4” for the wavelength selection field), “xxxx” indicates a sub-band
which consists of channel “xxxx”, 2 adjacent 100GHz channels on the longer
wavelength (lower frequency) side, and 1 adjacent 100GHz channel on the shorter
wavelength (higher frequency) side. Example: channel “9230” for this option
indicates a sub-band consisting of 4 channels on ITU-T 100GHz grids at
frequencies of 192100GHz, 192200GHz, 192300GHz, and 192400GHz. For 8 X
50GHz option (-“3” for the wavelength selection field), “xxxx” indicates a sub-
band which consists of channel “xxxx”, 4 adjacent 50GHz channels on the longer
wavelength (lower frequency) side, and 3 adjacent 50GHz channels on the shorter
wavelength (higher frequency) side. Example: channel “9230” for this option
indicates a sub-band consisting of 8 channels on ITU-T 50GHz grids at
frequencies of 192100GHz, 192150GHz, 192200GHz, 192250GHz, 192300GHz,
192350GHz, 192400GHz, and 192450GHz.
“0” indicates modulated output power range is between 0-3dBm. Please contact
Finisar if different power level is needed.
“LC” indicates the fiber connector is LC type. FC and other connector types are
also available.
“yyyy” indicates any special customized request and need to be agreed with
Finisar prior to ordering
•
•
•
•
©
Finisar Corporation –24-May-07
Rev_A
Page 9