Freescale Semiconductor
Advance Information
Document Number: MPC17533
Rev. 3.0, 7/2006
0.7 A 6.8 V Dual H-Bridge Motor
Driver
The 17533 is a monolithic dual H-Bridge power IC ideal for portable
electronic applications containing bipolar stepper motors and/or brush
DC-motors (e.g., cameras and disk drive head positioners).
The 17533 operates from 2.0 V to 6.8 V, with independent control of
each H-Bridge via parallel MCU interface (3.0 V- and 5.0 V-compatible
logic). The device features built-in shoot-through current protection
and an undervoltage shutdown function.
The 17533 has four operating modes: Forward, Reverse, Brake,
and Tri-Stated (High Impedance). The 17533 has a low total R
DS(ON)
of 1.2
Ω
(max @ 25°C).
The 17533’s low output resistance and high slew rates provide
efficient drive for many types of micromotors.
Features
• Low Total R
DS(ON)
0.8
Ω
(Typ), 1.2
Ω
(Max) @ 25°C
• Output Current 0.7 A (DC), 1.4 A (Peak)
• Shoot-Through Current Protection Circuit
• 3.0 V/ 5.0 V CMOS-Compatible Inputs
• PWM Control Input Frequency up to 200 kHz
• Built-In 2-Channel H-Bridge Driver
• Low Power Consumption
• Undervoltage Detection and Shutdown Circuit
• Pb-Free Packaging Designated by Suffix Code EV
17533
H-BRIDGE MOTOR DRIVER
EV SUFFIX (Pb-FREE)
98ASA10614D
16-PIN VMFP
ORDERING INFORMATION
Device
MPC17533EV/EL
Temperature
Range (T
A
)
-20°C to 65°C
Package
16 VMFP
5.0 V
13 V
17533
VDD
VG
5.0 V
VM
OUT1A
OUT1B
MCU
IN1A
IN1B
IN2A
IN2B
OE
OUT2A
OUT2B
S
N
Bipolar
Step
Motor
GND
Figure 1. 17533 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2006. All rights reserved.
FREESCALE [ FREESCALE SEMICONDUCTOR, INC ]
