SY SERIES
n
SPECIFICATIONS
Contact
Coil
Time Value
Life
Other
Item
Arrangement
Material
Configuration
Resistance (initial)
Rating (resistive)
Maximum Carrying Current
Maximum Switching Power
Maximum Switching Voltage
Maximum Switching Current
Minimum Switching Load*
Capacitance (at 0 MHz)
Nominal Power (at 20°C)
Operate Power (at 20°C)
Operating Temperature
Operate (at nominal voltage)
Release (at nominal voltage)
Mechanical
Electrical (at contact rating)
Vibration Misoperation
Resistance Endurance
Shock Misoperation
Resistance Endurance
Weight
SY-(
) -K (Single)
SY-(
) W - K (Bifurcated)
form C (SPDT)
Gold overlay silver palladium
Single (cross bar)
Maximum 100 mΩ (at 1 A 6 VDC)
0.5 A 20 VAC or A 24 VDC
2 A
60 AV, 24 W
20 VAC/60 VDC
A
mA VDC 0. mA 00 mVDC
Approximately .4 pF (between open contacts)
Approximately 5.0 pF (between coil and contacts)
50 to 75 mW
75 to 86 mW
–30°C to +90°C (no frost)/18 V coil: +85°C, 24 V coil: +80°C
Maximum 5 ms
Maximum 2 ms
5 × 06 operations minimum
× 05 operations minimum
0 to 55 Hz (double amplitude of .5 mm)
0 to 55 Hz (double amplitude of .5 mm)
00 m/s2 ( ± ms)
,000 m/s2 (6 ± ms)
Approximately .7 g
Bifurcated (cross bar)
*
Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual
load before production since reference values may vary according to switching frequencies, environmental conditions and
expected reliability levels.
n
INSULATION
Item
Resistance (initial)
Dielectric
Strength
Surge Voltage
open contacts
coil and contacts
Single
Minimum 1,000 MΩ (500VDC)
400 VAC min.
,000 VAC min.
500V (coil-contact) (0/60 µs standard wave)
Bifurcated
Minimum 1,000 MΩ (250VDC)
00 VAC min.
FUJITSU [ FUJITSU COMPONENT LIMITED. ]
