v01.1003
MICROWAVE CORPORATION
HMC400MS8
HIGH IP3 GaAs MMIC
MIXER, 1.7 - 2.2 GHz
Outline Drawing
12
MIXERS - SMT
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD MATERIAL: COPPER ALLOY
3 LEAD PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO THE PCB RF GROUND
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1
LO
This pin is AC coupled & matched to 50 Ohms
from 1.4 to 2.2 GHz. Blocking capacitors are required if line
potential is not equal to 0V.
2, 4
N/C
Not connected.
3, 6, 7
GND
This pin must be connected to RF ground.
5
IF Port
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor. Choose value of capacitor to pass
IF frequency desired. For operation to DC, this pin must not
sink/source more than 40 mA of current or failure may result.
8
RF Port
This pin is DC coupled & matched to 50 Ohm
from 1.7 to 2.2 GHz
12 - 216
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
