®
EL1517B
Data Sheet
December 19, 2006
FN6405.0
xDSL Differential Line Driver
The EL1517B is a dual operational amplifier designed for VDSL
and ADSL line driving in DMT based solutions. EL1517B
includes internal protection for high ruggedness against
lightning related transients. This device features a high drive
capability of 250mA while consuming only 7mA of supply
current per amplifier and operating from a single 5V to 12V
supply. This driver achieves a typical distortion of 80dBc, at
150kHz into a 25Ω load. The EL1517B is available in a
10 Ld HMSOP package and is specified for operation over the
full -40°C to +85°C temperature range. The device has control
pins C
0
and C
1
for controlling the bias and enable/disable of
the outputs. These controls allow for lowering the power to fit
the performance/power ratio for the application.
The EL1517B is ideal for ADSL, SDSL, HDSL2 and VDSL line
driving applications. All performance graphs in this datasheet
were generated for EL1517BIS and EL1517BIL. There is no
significant electrical difference between EL1517BIYE and the
performance curves for EL1517BIL.
The
EL1517B
can only be used for single supply operation.
Use EL1517BIL or EL1517BIS for dual supply applications.
Features
• Internal protection for high ruggedness against lightning
related transients
• Drives up to 250mA from a +12V supply
• 18V
P-P
differential output drive into 50Ω
• 20V
P-P
differential output drive into 100Ω
• -80dBc typical driver output distortion at full output at
150kHz
• -75dBc typical driver output distortion at 3.75MHz
• -60dBc typical driver output distortion at 8MHz
• -50dBc typical driver output distortion at 16MHz
• Low quiescent current of 7mA per amplifier
• 200MHz bandwidth
• Use for single supply applications
• Pb-free plus anneal available (RoHS Compliant)
Applications
• VDSL line drivers
• ADSL full rate CPE line driving
Ordering Information
PART NUMBER
(Note)
EL1517BIYEZ
EL1517BIYEZ-T7
TAPE
&
PART
MARKING REEL
BBBCA
BBBCA
-
7”
13”
-
13”
7”
_
13”
7”
PACKAGE
(Pb-Free)
10 Ld HMSOP
10 Ld HMSOP
10 Ld HMSOP
16 Ld QFN
16 Ld QFN
16 Ld QFN
8 Ld SOIC
8 Ld SOIC
8 Ld SOIC
PKG.
DWG. #
MDP0050
MDP0050
MDP0050
MDP0046
MDP0046
MDP0046
MDP0027
MDP0027
MDP0027
• G.SHDSL, HDSL2 line drivers
• HomePlug networking drivers
EL1517BIYEZ-T13 BBBCA
EL1517BILZ
EL1517BILZ-T13
EL1517BILZ-T7
EL1517BISZ
EL1517BISZ-T13
EL1517BISZ-T7
1517BIL
1517BIL
1517BIL
1517BIS
1517BIS
1517BIS
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
INTERSIL [ INTERSIL CORPORATION ]
