®
EL5001
Data Sheet
January 31, 2005
FN7376.2
6-Channel Clock Driver
The EL5001 is a 6-channel level shifting driver designed
primarily for use as a clock driver in LTPS LCD displays. The
EL5001 buffers and level shifts six logic level input signals.
The six channels are grouped in to two sets, one of two
channels and one of four channels. Each set can be
configured in the inverting or non-inverting modes.
Operating from 3.3V input logic, the output swing is set using
two reference input pins. These pins can be up to 18V
differential and are not buffered, so should therefore be
bypassed effectively.
The EL5001 is designed to drive capacitive loads of 500pF
with rise and fall times of just 20ns. A three-state pin is
provided to set all outputs in to a high impedance mode. The
ENABLE pin can be used to put the device in to a power
save mode where the power consumption drops to just 3µA.
The EL5001 is available in 20-pin QFN (4mm x 4mm) and
HTSSOP packages. Both are specified for operation over
the -40°C to +85°C temperature range.
Features
• SIx inverting/non-inverting channels
• 3.3V input logic
• 18V output
• 250µA typical supply current
• Drives up to 500pF
• T
R
/T
F
= 35ns max
• Disable function
• 20-pin QFN (4mm x 4mm) and HTSSOP packages
• Pb-free available (RoHS compliant)
Applications
• LTPS LCD clock drivers
• CCD driving
• Level shifters
Ordering Information
PART NUMBER
EL5001IL
EL5001IL-T7
EL5001IL-T13
EL5001ILZ
(See Note)
EL5001ILZ-T7
(See Note)
EL5001ILZ-T13
(See Note)
PACKAGE
20-Pin QFN
(4mm x 4mm)
20-Pin QFN
(4mm x 4mm)
20-Pin QFN
(4mm x 4mm)
20-Pin QFN
(4mm x 4mm)
(Pb-Free)
20-Pin QFN
(4mm x 4mm)
(Pb-Free)
20-Pin QFN
(4mm x 4mm)
(Pb-Free)
TAPE &
REEL
-
7”
13”
-
PKG. DWG. #
MDP0046
MDP0046
MDP0046
MDP0046
PART NUMBER
EL5001IRE
EL5001IRE-T7
EL5001IRE-T13
EL5001IREZ
(See Note)
EL5001IREZ-T7
(See Note)
EL5001IREZ-T13
(See Note)
PACKAGE
20-Pin
HTSSOP
20-Pin
HTSSOP
20-Pin
HTSSOP
20-Pin
HTSSOP
(Pb-Free)
20-Pin
HTSSOP
(Pb-Free)
20-Pin
HTSSOP
(Pb-Free)
TAPE &
REEL
-
7”
13”
-
PKG. DWG. #
MDP0048
MDP0048
MDP0048
MDP0048
7”
MDP0046
7”
MDP0048
13”
MDP0046
13”
MDP0048
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination
finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-
free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004, 2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
INTERSIL [ INTERSIL CORPORATION ]
