®
EL5106, EL5306
Data Sheet
September 1, 2004
FN7357.3
350MHz Fixed Gain Amplifiers with Enable
The EL5106 and EL5306 are fixed gain amplifiers with a
bandwidth of 350MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain setting resistors and can be configured
in a gain of +1, -1 or +2.
With a supply current of just 1.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
are also ideal for handheld, portable or battery powered
equipment.
The EL5106 and EL5306 also incorporate an enable and
disable function to reduce the supply current to 25µA typical
per amplifier. Allowing the CE pin to float or applying a low
logic level will enable the amplifier.
The EL5106 is offered in the 6-pin SOT-23 and the industry-
standard 8-pin SO packages and the EL5306 is available in
the 16-pin SO and 16-pin QSOP packages. All operate over
the industrial temperature range of -40°C to +85°C.
Features
• Pb-free Available as an Option
• Gain selectable (+1, -1, +2)
• 350MHz -3dB BW (A
V
= 2)
• 1.5mA supply current per amplifier
• Fast enable/disable
• Single and dual supply operation, from 5V to 12V
• Available in SOT-23 packages
• 450MHz, 3.5mA product available (EL5108 & EL5308)
Applications
• Battery powered equipment
• Handheld, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
Ordering Information
PART
NUMBER
EL5106IW-T7
EL5106IW-T7A
EL5106IS
EL5106IS-T7
EL5106IS-T13
EL5306IS
EL5306IS-T7
EL5306IS-T13
EL5306IU
EL5306IU-T7
EL5306IU-T13
EL5306IUZ
(See Note)
EL5306IUZ-T7
(See Note)
EL5306IUZ-
T13 (See Note)
PACKAGE
6-Pin SOT-23
6-Pin SOT-23
8-Pin SO
8-Pin SO
8-Pin SO
16-Pin SO (0.150”)
16-Pin SO (0.150”)
16-Pin SO (0.150”)
16-Pin QSOP
16-Pin QSOP
16-Pin QSOP
16-Pin QSOP
(Pb-free)
16-Pin QSOP
(Pb-free)
16-Pin QSOP
(Pb-free)
TAPE &
REEL
7” (3K pcs)
7” (250 pcs)
-
7”
13”
-
7”
13”
-
7”
13”
-
7”
13”
PKG. DWG. #
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
MDP0040
MDP0040
MDP0040
MDP0040
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
INTERSIL [ INTERSIL CORPORATION ]
