欢迎访问ic37.com |
会员登录 免费注册
发布采购

80221 参数 Datasheet PDF下载

80221图片预览
型号: 80221
PDF下载: 下载PDF文件 查看货源
内容描述: 100BASE - TX / 10BASE -T以太网媒体接口适配器 [100BASE-TX/10BASE-T Ethernet Media Interface Adapter]
分类和应用: 以太网
文件页数/大小: 91 页 / 612 K
品牌: LSI [ LSI COMPUTER SYSTEMS ]
 浏览型号80221的Datasheet PDF文件第6页浏览型号80221的Datasheet PDF文件第7页浏览型号80221的Datasheet PDF文件第8页浏览型号80221的Datasheet PDF文件第9页浏览型号80221的Datasheet PDF文件第11页浏览型号80221的Datasheet PDF文件第12页浏览型号80221的Datasheet PDF文件第13页浏览型号80221的Datasheet PDF文件第14页  
80220/80221  
3.0 FUNCTIONAL DESCRIPTION  
3.1 GENERAL  
The 80220/80221 is a complete 100/10 Mbps Ethernet  
Media Interface IC. The 80220/80221 has ten main  
sections: controller interface, encoder, decoder, scram-  
bler, descrambler, clock and data recovery, twisted pair  
transmitter, twisted pair receiver, MI serial port, and  
AutoNegotiation. A block diagram is shown in Figure 1.  
two pairs of category 3 or better UTP or STP twisted pair  
cable with Manchester encoded, 10 MHz binary data to  
achievea10Mbpsthruput. Thedatasymbolformatonthe  
twisted pair cable for the 100 and 10 Mbps modes are  
defined in IEEE 802.3 specifications and shown in Figure  
2.  
The 80220/80221 can operate as a 100Base-TX device  
(hereafter referred to as 100 Mbps mode) or as a 10Base-  
T device (hereafter referred to as 10 Mbps mode). The  
difference between the 100 Mbps mode and the 10 Mbps  
mode is data rate, signalling protocol, and allowed wiring.  
The 100 Mbps mode uses two pairs of category 5 or better  
UTP or STP twisted pair cable with 4B5B encoded,  
scrambled, and MLT-3 coded 62.5 MHz ternary data to  
achieve a thruput of 100 Mbps. The 10 Mbps mode uses  
On the transmit side for 100 Mbps operation, data is  
received on the controller interface from an external  
Ethernet controller per the format shown in Figure 3. The  
data is then sent to the 4B5B encoder for formatting. The  
encodeddataisthensenttothescrambler. Thescrambled  
and encoded data is then sent to the TP transmitter. The  
TP transmitter converts the encoded and scrambled data  
into MLT-3 ternary format, preshapes the output, and  
drives the twisted pair cable.  
ETHERNET MAC FRAME  
SFD DA SA  
INTERFRAME  
INTERFRAME  
GAP  
LN  
LN  
LLC DATA FCS  
GAP  
PREAMBLE  
100 BASE-TX TP DATA SYMBOLS  
SFD DA SA  
PREAMBLE  
LLC DATA FCS ESD  
IDLE  
IDLE  
SSD  
IDLE = [ 1 1 1 1 ...]  
SSD = [ 1 1 0 0 0 1 0 0 0 1 ]  
BEFORE / AFTER  
4B5B ENCODING,  
SCRAMBLING, AND  
MLT3 CODING  
PREAMBLE = [ 1 0 1 0 ...] 62 BITS LONG  
SFD = [ 1 1 ]  
DA, SA, LN, LLC DATA, FCS = [ DATA ]  
ESD = [ 0 1 1 0 1 0 0 1 1 1 ]  
10 BASE-T TP DATA SYMBOLS  
PREAMBLE  
SFD  
DA  
SA  
LN  
LLC DATA FCS  
SOI  
IDLE  
IDLE  
IDLE = [ NO TRANSITIONS ]  
= [ 1 0 1 0 ... ] 62 BITS LONG  
= [ 1 1 ]  
PREAMBLE  
SFD  
BEFORE / AFTER  
MANCHESTER  
ENCODING  
DA, SA, LN, LLC DATA, FCS = [ DATA ]  
SOI = [ 1 1 ] WITH NO MID BIT  
TRANSITION  
Figure 2. Twisted Pair Frame Format  
10  
MD400159/E