Corcom Product Guide
Dual Configuration Power Entry Module
Catalog: 1654001
Issue Date: 06.2011
L Series
UL Recognized
CSA Certified
VDE Approved
EDL4C / EHL4C
EDL1S / EHL1S
L Series
• Power entry module with switch or fuse
• For 10A capability and high performance filtering
see the P Series on page 192
• Two element circuit provides extended EMI
attenuation similar to EAB inlet filter
• North American or metric fuse holders
• Available with minimal leakage current for medical
applications (HL models)
Specifications
Maximum leakage current each Line to Ground:
DL Models
HL Models
@ 120 VAC 60 Hz:
.25 mA
2
A
@ 250 VAC 50 Hz:
.50 mA
5
A
Hipot rating (one minute):
Line to Ground:
Line to Line:
Operating Voltage:
1S & 1SC models (fixed):
4 & 4C Suffix:
Operating Frequency:
Rated Current:
Required Fuse(s):
North American:
Metric:
Switch:
2250 VDC
1450 VDC
250 VAC max.
100, 120, 220 or 240 VAC.
50/60 Hz
2 to 6A
one .25 x 1.25”
(not included)
two 5 x 20mm
(not included)
3
Power Inlet Filters & Power Entry Modules
Ordering Information
6EDL1SCM
Fuseholder Type
(pre-installed)
M – Metric
Omit for North American
Mounting Type
C– Snap-In
Omit for flange mount
Switch Option
S – DPST on/off switch
Omit for none
Voltage Selection Positions
1 or 4
L Series
Filter Type
D – General Purpose
H – Medical
omit for none
Leakage current designation
E – Low Leakage
(<0.5 mA)
Current Rating
2, 4 or 6A
DPST
10,000 operations at 51A max. inrush
175
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com