Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
Dual Stage RFI Power Line Filters for Switching Mode Power Supplies
EP / VP Series
UL Recognized
CSA Certified
VDE Approved
EP7 / VP7
EP1 / VP1
1
RFI Power Line Filters
EP3 / VP3
EP & VP Series
• Dual stage filter offers high insertion loss
• Well suited for meeting CISPR 22 A and
FCC Part 15J, Class B
• EP model meets very low leakage current
requirements
• 7A and 12A versions offer optimum package size
Specifications
Maximum leakage current each Line to Ground:
VP Models
EP Models
@ 120 VAC 60 Hz:
@250 VAC 50 Hz:
Hipot rating (one minute):
Line to Ground:
Line to Line:
Rated Voltage (max):
.73 mA
1.27 mA
.21 mA
.36 mA
2250 VDC
1450 VDC
250 VAC
50/60 Hz
3 to 20A
Ordering Information
3 EP 7 M
Suffix
M – Metric inserts
(style 7 only)
Omit for standard or none
Input / Output Style
1 – .250 [6.3] spade terminals
3 – Wire leads
6 – Threaded bolt
7 – IEC inlet*
(line side)
.250 [6.3] spade terminals
(load side)
Operating Frequency:
Rated Current:
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir
(85-Ta)/45
Available Part Numbers
3EP1
3EP3
3EP7
3EP7M
6EP1
6EP3
7EP1
7EP3
10EP1
10EP3
12EP1
12EP3
20EP1
20EP6
20VP1
20VP6
EP / VP Series
EP – Low leakage
(<0.5 mA)
VP – Standard
(20A only)
Current Rating
3, 6, 7, 10, 12 or 20A
Accessories
Electrical Schematic
LINE
LOAD
GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord
*IEC 60320-1 C14 inlet mates with C13 connector
27
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com