NEW HIGHER INTENSITY
DISCRETE LEDs - Ø 5mm Green
•
•
•
•
High Intensity
Also available as a
3mm device
Solid state reliability
Can be supplied in
bulb replacement
and panel mounting
formats
110191 SERIES
MLQ = 50
Dimensions in mm (Typical)
Tolerance +/- 0.2 UOS
Not to Scale
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. * Duty Cycle <=1/10, Pulse Width <= 10msec
PART NUMBER
COLOUR
TYP. FWD
VOLTAGE
Vf @ Iopr
MAX FWD
VOLTAGE
Vf @ I opr
FORWARD
CURRENT
lopr
MAX REV
CURRENT
Ir(Vr=5V)
LUMINOUS
INTENSITY
lv@lopr
CHROMATICITY
COORDINATES
VIEWING
ANGLE
2θ
1
/
2
STANDARD INTENSITY
OPTICAL / ELECTRICAL CHARACTERISTICS (Ta = 25oC)
-
110191
UNITS
Green
Water Clear
3.4
V
3.9
V
20
mA
10
µA
6000 - 15000
mcd
0.17 / 0.700
x/y
15
deg
PART NUMBER
COLOUR
FORWARD
CURRENT
Ioprmax
PEAK FWD
CURRENT
I fp
*
REVERSE
VOLTAGE
Vr max
POWER
DISSIPATION
Pdmax
DOM
WAVELENGTH
Typ.
λ
D
OPERATING
TEMP
Topr
STORAGE
TEMP
Tstg
ABSOLUTE MAXIMUM RATINGS (Ta = 25oC)
-
110191
UNITS
Green
Water Clear
30
mA
100
mA
5
Vdc
120
mW
525
nm
-25 to +80
°C
-30 to +100
°C
STANDARD INTENSITY
PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE LEDs
Static Electricity and Surge
Static electricity and surge will damage the LED and a high standard of care must
be taken during handling. It is recommended that a wristband, conductive mat or
anti-electrostatic glove is used when handling the LEDs. All devices, equipment
(e.g. soldering iron points) and machinery must be properly grounded.
SAFETY PRECAUTIONS FOR HANDLING HIGH BRIGHTNESS LEDs
The light output of the Products may cause injuries to human eyes in
circumstances where they are viewed directly with unshielded eyes for more than
a few seconds.
Please refer to European Standard BSEN 100015-1 1992
for further information.
© Optosource 2001
Datasheet Reference 17/01 Issue 01
Optosource
•
Fax: +44 (0)1229 580012
•
email: sales@optosource.com
•
website: www.optosource.com
• Telephone +44 (0)1229 484623
Optosource is a division of Marl International Limited, experts in LED technology since 1972.
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to
either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service.
MARL [ MARL INTERNATIONAL LIMITED ]
