71M6543F/H and 71M6543G/GH Data Sheet
VBAT/
71M6533
71M6543
71M6543
V3P3D
V3P3D
R2
1kΩ
Reset
Switch
RESET
DGND
RESET
100Ω
R1
10kΩ
R1
0.1µF
GNDD
Figure 36: External Components for the RESET Pin: Push-Button (Left), Production Circuit (Right)
4.11 Connecting the Emulator Port Pins
Even when the emulator is not used, small shunt capacitors to ground (22 pF) should be used for protection
from EMI as illustrated in Figure 37. Production boards should have the ICE_E pin connected to ground.
LCD Segments
(optional)
71M6543
V3P3D
ICE_E
62 Ω
E_RST
62 Ω
E_RXT
E_TCLK
62 Ω
22 pF 22 pF 22 pF
Figure 37: External Components for the Emulator Interface
4.12 Flash Programming
4.12.1 Flash Programming via the ICE Port
Operational or test code can be programmed into the flash memory using either an in-circuit emulator or
the Flash Programmer Module (TFP-2) available from Teridian. The flash programming procedure uses
the E_RST, E_RXTX, and E_TCLK pins.
4.12.2 Flash Programming via the SPI Port
It is possible to erase, read and program the flash memory of the 71M6543 via the SPI port. See
2.5.12 for a detailed description.
4.13 MPU Demonstration Code
All application-specific MPU functions mentioned in 4 Application Information are featured in the
demonstration C source code supplied by Teridian. The code is available as part of the Demonstration Kit
for the 71M6543. The Demonstration Kits come with the 71M6543 preprogrammed with demonstration
firmware and mounted on a functional sample meter Demo Board. The Demo Boards allow for quick and
efficient evaluation of the IC without having to write firmware or having to supply an in-circuit emulator
(ICE).
96
© 2008–2011 Teridian Semiconductor Corporation
v1.2
MAXIM [ MAXIM INTEGRATED PRODUCTS ]
