35W Single Output Switching Power Supply
Features :
Universal AC input / Full range
EPS-35
series
High efficiency up to 90%
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
3" 2" compact size
LED indicator for power on
No load power consumption<0.3W
3 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
PEAK LOAD(10sec.)
OUTPUT
VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER LOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
EMC
(Note 4)
EPS-35-3.3
3.3V
6A
0 ~ 6.6A
19.8W
Note.6
21.78W
EPS-35-5
5V
6A
0 ~ 6.6A
30W
33W
70mVp-p
4.75 ~ 5.5V
2.0%
0.5%
1.0%
EPS-35-7.5
7.5V
4.7A
0 ~ 5.2A
35.25W
39W
80mVp-p
EPS-35-12
12V
3A
0 ~ 3.3A
36W
39.6W
100mVp-p
EPS-35-15
15V
2.4A
0 ~ 2.65A
36W
39.75W
100mVp-p
EPS-35-24
24V
1.5A
0 ~ 1.65A
36W
39.6W
180mVp-p
EPS-35-27
27V
1.3A
0 ~ 1.45A
35.1W
39.15W
180mVp-p
EPS-35-36
36V
1A
0 ~ 1.1A
36W
39.6W
200mVp-p
EPS-35-48
48V
0.75A
0 ~ 0.82A
36W
39.36W
240mVp-p
RIPPLE & NOISE (max.)
Note.2
60mVp-p
3.1 ~ 3.6V
VOLTAGE TOLERANCE
Note.3
2.5%
0.5%
1.5%
7.13 ~ 8.25V 10.8 ~ 13.5V 13.5 ~ 16.5V 21.6 ~ 27V
1.0%
1.0%
1.0%
2.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1.0%
24.3 ~ 29.7V 32.4 ~ 39.6V 43.2 ~ 52.8V
1.0%
1.0%
1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1000ms, 30ms/230VAC
1000ms, 30ms/115VAC at full load
50ms/230VAC
16ms/115VAC at full load
Note.5
85 ~ 264VAC
120 ~ 370VDC
82%
84%
0.5A/230VAC
87%
88%
89%
89%
89%
90%
47 ~ 63Hz
80%
0.75A/115VAC
<1mA/240VAC
115 ~ 170% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.7 ~ 4.6V
5.6 ~ 6.75V 8.63~ 10.5V 14 ~ 17V
17.25 ~ 20.25V 27.6 ~ 32.4V 31.05 ~ 36.45V 39.7 ~ 46.8V 53.3 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +70
(Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria A
649.1Khrs min.
MIL-HDBK-217F (25
)
76.2*50.8*24mm (L*W*H)
0.085Kg; 120pcs/11.2Kg/0.97CUFT
COLD START 40A/230VAC
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltage. Please check the static characteristics for more details.
6. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
File Name:EPS-35-SPEC 2012-04-20
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
