10W Single Output Industrial DIN Rail Power Supply
Features :
Universal AC input/Full range
MDR-10
series
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
NEC class 2 / LPS compliant
Built in DC OK active signal
LED indicator for power on
No load power consumption<0.75W
100% full load burn-in test
3 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION
OVER VOLTAGE
FUNCTION
MDR-10-5
5V
2A
0 ~ 2A
10W
5.0%
1.0%
5.0%
Note.5
500ms, 30ms/230VAC
MDR-10-12
12V
0.84A
0 ~ 0.84A
10W
120mVp-p
3.0%
1.0%
3.0%
1000ms, 30ms/115VAC at full load
25ms/115VAC at full load
120 ~ 370VDC
81%
MDR-10-15
15V
0.67A
0 ~ 0.67A
10W
120mVp-p
3.0%
1.0%
3.0%
MDR-10-24
24V
0.42A
0 ~ 0.42A
10W
150mVp-p
2.0%
1.0%
2.0%
RIPPLE & NOISE (max.)
Note.2
80mVp-p
120ms/230VAC
85 ~ 264VAC
47 ~ 63Hz
77%
81%
84%
0.33A/115VAC
0.21A/230VAC
COLD START 35A/115VAC
70A/230VAC
<1mA / 240VAC
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
13.8 ~ 16.2V
17.25 ~ 20.25V
5.75 ~ 6.75V
11.5 ~ 16.5V / 40mA
27.6 ~ 32.4V
18 ~ 27V / 20mA
Protection type : Shut down o/p voltage, re-power on to recover
9 ~ 13.5V / 40mA
DC OK ACTIVE SIGNAL (max.)
3.75 ~ 6V / 50mA
WORKING TEMP.
-20 ~ +70 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85
, 10 ~ 95% RH
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSION
PACKING
NOTE
0.03%/ (0 ~ 50
Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024,EN61000-6-1,EN61204-3, light industry level, criteria A
584K hrs min. MIL-HDBK-217F (25
22.5*90*100mm (W*H*D)
0.17Kg; 72pcs/13.2Kg/0.91CUFT
)
SAFETY &
EMC
(Note 4)
OTHERS
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:MDR-10-SPEC 2011-05-24
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
