15W Single Output Switching Power Supply
Features :
Universal AC input / Full range
RS-15
series
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105
long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty
..
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
RS-15-3.3
3.3V
3A
0 ~ 3A
9.9W
RS-15-5
5V
3A
0 ~ 3A
15W
80mVp-p
4.75 ~ 5.5V
±
2.0%
±
0.5%
±
1.5%
RS-15-12
12V
1.3A
0 ~ 1.3A
15.6W
120mVp-p
10.8 ~ 13.2V
±
1.0%
±
0.5%
±
0.5%
1000ms, 30ms/115VAC at full load
RS-15-15
15V
1A
0 ~ 1A
15W
120mVp-p
13.5 ~ 16.5V
±
1.0%
±
0.5%
±
0.5%
RS-15-24
24V
0.625A
0 ~ 0.625A
15W
200mVp-p
22 ~ 27.6V
±
1.0%
±
0.5%
±
0.5%
RS-15-48
48V
0.313A
0 ~ 0.313A
15W
200mVp-p
43.2 ~ 52.8V
±
1.0%
±
0.5%
±
0.5%
RIPPLE & NOISE (max.)
Note.2
80mVp-p
2.9 ~ 3.6V
VOLTAGE TOLERANCE
Note.3
±
3.0%
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
EMC
EMI CONDUCTION & RADIATION
(Note 6)
HARMONIC CURRENT
EMS IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Note.4
±
0.5%
Note.5
±
2.0%
1000ms, 30ms/230VAC
70ms/230VAC
85 ~ 264VAC
47 ~ 63Hz
72%
0.35A/115VAC
15ms/115VAC at full load
120 ~ 370VDC
77%
0.25A/230VAC
81%
81%
82%
82%
COLD START 65A / 230VAC
<2mA / 240VAC
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.45V
5.75 ~ 6.75V
13.8 ~ 16.2V
Protection type : Shut off o/p voltage, clamping by zener diode
U1 Tj 140
-20 ~ +70
typically (U1) detect on main control IC
(Refer to output load derating curve)
17.25 ~ 20.25V
28.4 ~ 32.4V
55.2 ~ 64.8V
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
±
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
70%RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, light industry level, criteria A
1608.8Khrs min. MIL-HDBK-217F (25
62.5*51*28mm (L*W*H)
0.13Kg; 108pcs/15Kg/0.71CUFT
)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:RS-15-SPEC 2007-10-25
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
