Micrel, Inc.
5V/3.3V HIGH-SPEED
DIFFERENTIAL RECEIVER
ECL Pro™
SY10EP16V
ECL Pro™
SY10EP16V
FEATURES
■
Faster version of the SY10EL16V
■
Guaranteed AC performance over temperature and
supply voltage:
– DC to 3GHz clock throughput
– <180ps tr/ft time
■
Internal 75k
Ω
input pulldown resistor
■
Improved output waveform characteristics
■
10K ECL compatible I/O
■
Available in small 8-pin (3mm) MSOP and SOIC
packages
ECL Pro™
DESCRIPTION
The SY10EP16V is a high-speed differential receiver.
The device is functionally equivalent to the EL16V
devices, with higher performance capabilities. With output
transition times significantly faster than the EL16V, the
SY10EP16V is ideally suited for interfacing with high-
frequency sources.
The SY10EP16V provides a V
BB
output for either
single-ended use or as a DC bias for AC coupling to the
device. The V
BB
pin should be used only as a bias for
the SY10EP16V as its current sink/source capability is
limited. Whenever used, the V
BB
pin should be bypassed
to the most positive supply voltage (V
CC
for LVPECL)
applications) via a 0.01µF capacitor.
Under open input conditions (pulled to V
EE
), internal
input clamps will force the Q output LOW.
All support documentation can be found on Micrel’s web
site at www.micrel.com.
PIN NAMES
Pin
D, /D
Q, /Q
V
BB
V
CC
V
EE
Function
ECL Data Inputs
ECL Data Outputs
Reference Voltage Output
Positive Power Supply
Negative Power Supply
ECL Pro is a trademark of Micrel, Inc.
M9999-112805
hbwhelp@micrel.com or (408) 955-1690
1
Rev.: D
Amendment: /0
Issue Date: November 2005
MICREL [ MICREL SEMICONDUCTOR ]
