1N5333B thru 1N5388B
Silicon 5 Watt Zener Diodes
SCOTTSDALE DIVISION
DESCRIPTION
The 1N5333-5388B JEDEC registered series of axial-leaded 5.0 watt
Zeners provides voltage regulation in a selection from 3.3 to 200 volts with
different tolerances as identified by specific suffix letter on the part number.
These plastic encapsulated Zeners have moisture classification of Level 1
with no dry pack required and are also available in various military
equivalent screening levels by adding a prefix identifier as also described in
the Features section. They may be operated at high maximum dc currents
with adequate heat sinking with their comparatively low thermal resistance
design. Microsemi also offers numerous other Zener products to meet
higher and lower power applications.
APPEARANCE
WWW .
Microsemi
.C
OM
T-18
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
FEATURES
•
JEDEC registered 1N5333 to 1N5388B
•
Zener voltage available 3.3V to 200V
•
Standard voltage tolerances are plus/minus 5%
with B suffix and 10 % with A suffix identification
•
Tight tolerances available in plus or minus 2% or
1% with C or D suffix respectively
•
Options for screening in accordance with MIL-
PRF-19500 for JAN, JANTX, JANTXV, and
JANS are available by adding MQ, MX, MV, or
MSP prefixes respectively to part numbers.
•
Surface mount equivalents available as
SMBJ5333 to SMBJ5388B, or SMBG5333B to
SMBG5388B
APPLICATIONS / BENEFITS
•
Regulates voltage over a broad operating current and
temperature range
•
Wide selection from 3.3 to 200 V
•
Flexible axial-lead mounting terminals
•
Nonsensitive to ESD per MIL-STD-750 Method 1020
•
Withstands high surge stresses
•
Minimal changes of voltage versus current as
specified by voltage regulation (∆V
Z
)
•
High specified maximum current (I
ZM
) when
adequately heat sunk
•
Moisture classification is Level 1 per IPC/JEDEC J-
STD-020B with no dry pack required
MAXIMUM RATINGS
•
•
•
Power dissipation at 25
º
C: 5.0 watts (also see
derating in Figure 1).
Operating and Storage temperature: -65
º
C to
+150
º
C
Thermal Resistance: 25
º
C/W junction to lead at
3/8 (10 mm) lead length from body, or 85
º
C/W
junction to ambient when mounted on FR4 PC
board (1oz Cu) with 4 mm
2
copper pads and
track width 1 mm, length 25 mm
Steady-State Power: 5 watts at T
L
< 25
o
C 3/8
inch (10 mm) from body, or 1.47 watts at T
A
=
º
25 C when mounted on FR4 PC described for
thermal resistance (also see Figure 1)
Forward voltage @1.0 A: 1.2 volts (maximum)
Solder Temperatures: 260
º
C for 10 s (max)
MECHANICAL AND PACKAGING
•
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
•
TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, method 2026
•
POLARITY: Cathode indicated by band. Diode to
be operated with the banded end positive with
respect to the opposite end.
•
MARKING: Part number
•
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
•
WEIGHT: 0.7 grams
•
See package dimensions on last page
1N5333B thru 1N5388B
•
•
•
Copyright
2003
7-23-2003 REV B
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
MICROSEMI [ MICROSEMI CORPORATION ]
