FEATURES AND SPECIFICATIONS
5.00mm (.197”) Pitch
MX150
TM
Cable-Sealed
1-by-2 Connection System
terminal-to-housing retention forces in excess of
USCAR-2 requirements. The cost-effective connector
design features all-in-one plug and receptacle housings
with a pre-assembled interfacial seal and terminal
position assurance (TPA).
Optional connector position assurance (CPA) and clip
slot features are offered to increase connector-to-
connector and connector-to-vehicle retention during
use. The MX150 cable-sealed connection system
complements Molex’s extensive MX150 product line.
For additional information about this product visit:
www.molex.com/ind/mx150.html.
MX150 cable-sealed, 1-by-2 connectors are the latest addition to the high-performance MX150
connector system, providing a valuable space-saving solution for small-circuit applications
Molex’s MX150 cable-sealed, 1-by-2 connection
system was designed to meet the need for a rugged,
environmentally sealed connector system supporting
both low-level signal as well as power applications up
to 22.0A for small circuit size applications where space
is a premium.
The innovative cable-sealed connector family is based
on the 1.50mm (.059”) pitch ISO blade-type terminal
system. The cable-seal design offers increased sealing
reliability for a large range of SAE wire gauges
(14 to 22) as well metric size wires, while offering
low terminal-to-housing insertion forces, and high
Features and Benefits
■
Compact 1.50mm (.059”) terminal connector is
capable of up to 22.0A continuous current
■
Meets USCAR footprint: 150-S-002-1-Z01 to ensure
mating with USCAR connector interfaces
■
Glass-filled thermoplastic housing and pre-loaded
Terminal Position Assurance (TPA) ensures crimped
terminal leads are properly locked into the
connector (TPA will not seat and the connector
system will not latch if the terminal is not locked
properly into position) and meets up
to Temperature Class 3 performance
■
Integral locking latch with secondary, pre-loaded
connector position assurance (CPA) option ensures
the connector system is properly latched (CPA will
not move to final locking position if the connector
is not latched)
■
Optional clip slot aids in vehicle routing by offering
an optional orientation clip attachment
■
Audible and tactile clicks on insertion, extraction
and mating feedback facilitates reliable mating,
and terminal loading and removal
34675
Male Connectors
34062
Female Receptacles
1-by-2 Cable-Sealed Connection System
1-by-2 Cable-Sealed Connection System
Cable-Sealed Male and Female Terminals
SPECIFICATIONS
Reference Information
Packaging:
Housings – Bulk Pack
Terminals – Reel
Mates With:
Series 34675 male connector to Series 34062
female receptacle
Use With:
Terminals: 34080 Male / 34083 Female
Designed in: Millimeters
Electrical
Voltage (max.): 500V
Current (max.): 22.0A
Contact Resistance: 10 milliohms max.
Dielectric Withstanding Voltage: 1500V AC
Isolation Resistance: 20 Megohms min.
Mechanical / Electrical / Sealing
Mating Force: Less than 45N (10.1 lb)
Unmating Force: Less than 45N (10.1 lb)
Connector Retention (Primary latch): 110N (24.7 lb) min.
Contact Retention to Housing: 90N (20.2 lb) min.
Contact Insertion Force Into Housing: 30N (6.7 lb) max.
Connector Audible Feedback: 7dB over ambient
Polarization Feature Effectiveness: 220N min.
FCLT (Class 3): 20 Milliohms max.
Durability (10 Cycles): 10 Milliohms max.
Thermal Shock (Class 3, 110cycles): 10 Milliohms max.
Sealing: (USCAR-2 Rev 4)
Pressure/Vacuum Immersion:
28kPa (4psi) 15 sec min.
Isolation resistance: 20 Megohms @ 500V DC min.
Physical
Housing: Nylon 6, 30% glass-filled
TPA: PBT, 30% glass-filled
Contact: C19025 Copper (Cu) Alloy
Plating:
Contact Area — Tin (Sn)
Underplating — Nickel (Si)
Operating Temperature: -40 to +125 °C
MOLEX [ Molex Electronics Ltd. ]
